Classic Accessories Snow Thrower Cover

This is a great snowblower cover. It's lightweight and fits fine (once I finally worked out how it's supposed to fit.) The value for the price is really off the charts. Highly recommend.

This cover is absolutely awesome! I ordered a cover from the place that sold us the snow blower. After one good gust during a nor'easter, it took flight and ended up in the woods - found by a hiker, the same day this cover was delivered. Well, the one that took flight makes a fine bike cover and I could NOT BE MORE PLEASED with this cover. It fits nice and snug and it's not made from cheap plastic. This is a quality cover for very fair $$. It's roomy enough to cover the whole unit, but it has a nice tight fit at the bottom, no way will it take flight like the old cover did. It sheds water, snow and ice. The seller deserves better because he shipped me a quality product in a very timely fashion and it took me till now to finish my review. I highly recommend this product and when I'm in need again of this type of product I'll gladly shop this seller first!

This cover fit my John Deere 828d snow blower perfectly once I figured out which end went where. (HINT: attached bag goes on handle bar end) It goes on easily and covers the entire machine, including the tires, without getting hung up on any parts. There is nothing to strap, the bottom is all elastic, fits snuggly yet not tightly, so it is very easy to remove and seems it would stay on in heavy winds, unlike the tarp I used before this purchase. The biggest problem, and the reason I only gave this 4 stars, is that the material is VERY THIN. Although it seems to be a durable, nylon-type material, I'm guessing it will tear easily.

This cover fits my older Ariens snow blower with room to spare. The cover is lightweight but is reinforced at key points. With a little care installing and removing (so as to not cut it on any sharp edges) , this cover will last a long time. I have had the cover for a year now and it just like when I first got it. The elastic bottom has not loosened a bit and still holds it well in place. I do not have a garage so I use the cover all year to protect the blower from the elements. I would recommend this cover to anyone. Great product at a good price.

I had previously used a grill cover from Lowes as a snow blower cover. It was inexpensive (~$15), constructed from moderately heavy plastic, with a soft, non-woven polyester lining. It fit pretty well. Looked like it would be pretty durable. But within 2 years, the plastic degraded from UV exposure and cracked everywhere. Even before that, the sharp points on the blower (handles, shoot) started to damage the cover. I mention this just as a point of comparison, because when this cover arrived, I was surprised at how thin the material was. No lining at all. It was so thin (and just slightly stretchy) that I at first thought it was simply a sheet of plastic with an embossed pattern, but on closer examination of an edge, where I could spot some fraying, I could see it actually was woven from fine threads. Given this, I'm pretty skeptical that it will hold up. Although if the material is tear resistant, and adequately UV resistant, it doesn't need to be thick or lined to do the job. Only time will tell. They did bother to double up on the material in a few places, such as over the shoot, which should improve the durability, but oddly they didn't bother to double up the material around the handles, which often have pointy levers and ends. If you hold the cover up to the light, you'll also see light streaming through all the pinholes made by the stitching on the seams. (Some seams span across the engine.) What's worse is that the manufacturer/importer (Classic Accessories) warns in the instructions not to use soap when you wash the cover, otherwise you will "remove the protective coatings added by the factory." Which means rain exposure is also likely to eventually wash off that coating. So I'm doubting how well it will remain waterproof and am planning to use plastic to cover the blower's engine, and use this cover to shield the plastic from UV exposure and keep it from blowing away. It doesn't feel like a $30 product. More recently I looked at other grill covers at Lowes that cost more than the original one I used, but less than this product. They used a coarse woven nylon like material - more like a canvas - and with a lining. Much more durable in appearance than this product, and what I was expecting this product to be. On the up side, it fit my compact 24" Snapper with plenty of room. I would recommend this if you are looking for a dust cover to put over your snow blower while it is stowed in your garage. Something you'll remove once in the winter and put back in the spring. It doesn't appear to be a good choice to weather protect a blower that is stored outside.

It's size is a little smaller than my new Smart Power 24 but it fits well. There is a tag saying "FRONT". Put it on the inside front and the built-in bag holder will be on the inside when installed. It even covers the wheels. HAPPY !!!

Fits exactly as expected. You have to put it over the handles first but there is a tag saying where the front is so it's easy to figure out. My first snowblower was about a 24" cut and the cover fit with room to spare however it broke (RIP) and I replaced it with a large Craftsman 9.5 hp 29" cut snowblower. It's a somewhat snug fit but covers everything except a small part of the wheel. Considering the size difference in snow blowers, I'm very happy with how the cover fits. I'd purchase it again if I were ever to get another snow blower.

Bought this cover for a Husqvarna St224. Fits nice but, you must put it on from back to front. Not a problem, just slip cover over the handles first. I would not call the fit on the 224 snug, it will probably fit the next size up snow blower without a problem. Shock cord keeps it tight around the bottom. Material seems light but it is surprisingly strong. I gave it a real good pull by hand figuring it would just rip but it held without any signs of weakening. If first impressions mean anything with this cover, I should get at least a couple of years use out of it. Will be using this as an outside cover so I will give updates. (especially if it fails in some way)

Awesome! I don't know how other people review but I call it as I see it, this is a great cover, we have a 30 in 2 stage snowblower and it fits perfect!. We didn't want to 'struggle' to put it on nor have it form fitting so that you would be freezing in the cold trying to put it on. Its fits over the entire machine including the handle bars down to the ground. The price was the cheapest I found, the material light but seems durable, I am not expecting to get 10 years out of it though.

Originally purchased this cover in Aug 2019. It it November 2021 and it has developed a slight tear in it and has faded a fair bit. This cover is great for keeping the elements off your blower. I bought another to replace the old one that probably would last another season. But $50 Canadian for two years is great value and since I use it a lot( even start it in summer which means removing the cover) I have no problem spending that money for peace of mind. I have read many reviews that state this item is too tight and doesn't fit properly. This is the way you want it to fit believe me! Nice and tight so that it doesn't blow away or flap too much. I have a two stage Simplicity 24 inch thrower and this cover fits perfectly! If you have a larger blower , it will probably fit as well. The width can go more(maybe 36"?) its front to back that is tight. All you need to do is make sure that the part of the cover that has the "front" label on it, goes towards the front of the machine. Begin by sliding the back of the cover over the handles about half way to the ground. Then stretch the "front " label over the auger. Next pull the part over the handles as far down as it will go. Then pull the front as far down as it will go. That's it! The elastic bottom cinches nicely around it for a great fit! I keep my chute in the 'up' position and it still fits. Perfect for outside storage.

I am very pleased with this cover. I was little awkward trying to use it for the first time. I actually thought at one point that it was way too small. But, it is not. I love the elastic around it. It fits very well to the blower and is very wind resistant. The day I installed it was extremely windy and the blower stays outside. Never came off. I constantly had to re-install my old cover on windy days.

Bought in 2019 and I have to look for a new one this year. 3 years isn't bad but I was expecting a little more. Full disclosure, it was left out year round and is extremely sun-bleached and ripped in several places. Pros: Great fit and keeps the unit dry. Easily fit my 24-inch two-stage snow blower right down to the ground covering to the bottom of the front of the unit and still able to tuck under the tires at the back. For the price, it is a relatively good cover. Cons: Sun-bleached and ripping in several areas and that was with taking care when covering the snow blower and easing it on. The rips occurred in locations that the wind would push it against edges on the machine (handles and chute). For the price, I suppose I may have expected too much from this cover.

The cover is very well made and comes with an attached pouch with drawstring to store the cover off season. I own a Yardworks 208cc 24" blower and this cover is slightly too big, however, with the elastic bottom it actually fits nicely. It is holding in place without any issues. Even with strong winds this cover is holding fast. I would recommend this product.