Laser Marking Spray

I have used this marking spray a few times and each time it has worked perfectly. This spray is advertised for use with 25w and above CO2 lasers. The laser I have is an xTool D1 Pro, 10w diode and it works perfectly fine. Just follow the instructions on the can and don't cut corners. The spray that is left after the laser process cleans off easily under water at the sink.

Better than Brilliance brand.

Ce produit est idéal pour la gravure sur aluminium anodisé. Je le rachèterai sans hésiter pour mes prochains travaux de gravure.

3 stars because the product itself worked pretty well. I wish I’d taken some pictures, but it was a rush order (with how late the spray arrived) and I just had to get the product out the door. Prior to spraying, I cleaned all of the materials, 25 steel dog bowls, same design, same set up etc. I sprayed each bowl the day before I used the laser, approx 28 hrs before I used the laser on them. That said, they looked dry only minutes after I sprayed them, ensuring an even application. **PLEASE NOTE!! The nozzle somehow got stuck “on” and continued to spray despite the fact my finger was not even on the nozzle any longer. It would continue to spray for a good 2-10 seconds before stopping. This resulted in a fair amount of the product being wasted. After the first few times of it happening (cause it was not doing this consistently, making it harder to predict), I took the cap off to see if there was anything I could do to clear it out or stop that from occurring again. There was nothing that I could see that was obviously causing that issue. To be honest I didn’t have too much time to sit an inspect/troubleshoot, so I ended up just trying to have additional bowls ‘ready’ on a jig so if it was continuously spraying and not able to stop it then it I could at least get some of the product on the outside of the bowls. That was kind of irritating, given how pricey this stuff is, and how long I had to wait- with rush projects to get done. I also noticed that there was some areas that were lasered (again, same settings design and material, even coats of product) that appeared ‘pitted’ or bubbled somehow. Whether this is an issue with the product or the material is an unknown to me at this point, as I don’t have enough experience to say. As I said, it took a long time to get here (YYC, AB) and it’s painfully expensive, especially when considering how much was wasted to a faulty spray mechanism at the top. If I could do half stars I’d maybe do 3.5 ⭐️ . If there was no faulty spray mechanism costing me wasted product I’d give a 4 ⭐️ if there was better shipping time, price and no inconsistency in the laser result I’d give a 5⭐️ If anyone is wondering, as I was - I was using the Xtool F1, with the 10w (Blue) giving the best result, I used 75% power due to the material being sort of tricky, and 230 for speed and it seemed to do the trick on a stainless steel dog bowl from Princess Auto. I highly, HIGHLY recommend ordering extra if you have a project that you are unsure of how the material will do, settings, all of that, and that you make time and allowance to play with the best settings for your project. I used another product recently (shipped in powder form) that was NOT GOOD, and it stated no where on the page or pictures that it was meant for co2 lasers only. I found out only after I opened it up and read the instructions for mixing. So, my advice is make sure that the product works for the type of laser you are working with because YES, it does matter!

I bought this because of the reviews that say it will work with a 10 watt laser. Tried it and it worked great. Applied a coat to a pair of ratchets. Taped them to my lasers bed one at a time with some masking tape. Set the laser to full power and a slow speed and let it rip. Worked perfectly.