194367-7

This Makita guide rail is very well made and is perfectly straight. Mine was shipped in a wood frame and fiber board box weighing 39.5 lbs. total weight.

After using the Makita Track Saw and the included short guide, I went ahead and purchased the 118" guide. I am glad that I spent the money. The guide works excellent for the long side of 4' x 8' plywood sheets. The cuts are just as excellent as the short guide. No splinters, no clamps, no dust! The only con with the 118" guide is storing it when it is not in use. I created a rack near the ceiling of my workshop that holds all my long straight edges. The Makita 118" fits right in with the rest of them. I don't know if I would take this to a job site without some protective casing to keep it straight, but it works great in my workshop. I can't say enough about the dust port on the Makita Track Saw. If you need to be dustless, when you cut sheet goods, the Makita Track Saw used with the 118" guide, hooked up to a dust collection system works great for me. The combination just takes my wood shop environment to a higher level of "dust free". I am always amazed these days when the sales hype actually turns into reality. The Makita Track Saw and accessories are truly amazing. They have met and exceeded my expectations. Thank you Makita!!!

I had 2x 55 rails using the extension bar... things... This was fine, mostly. There was a lot of tweaking and wiggling and more tweaking to ensure my line was straight across the two. After a bunch of use and moving it around, I would find more black dust (indicative of the saw eating into the splinter guard) so I would have to re-adjust and get another rubber guard. This singular 118" rail has solved that for me. I am still cautious moving it around as it is just an aluminum extrusion so not SUPER robust. It may be stronger than I think it is, but I am not willing to chance it. My lines are straight and I am able to more quickly breakdown sheet goods without the endless measuring and tweaking and re-securing of an independent straight edge. Make sure you have room for it though, and download the free guide rail mounting STLs so you can get it on the wall and out of the way.

I was worried because of the other reviews, but mine came fully packaged and the box was undamaged. The track itself is as straight as I can tell. I used an 8ft level and a laser from one end and then again from the middle out. As far as I can tell it is perfectly straight. After I make a test cut I can use calipers to see if the strip I cut is the same width along the length, but I think it should be fine. Better than having to join my festool tracks, they never go together straight no matter what and I mostly do lot of ripping of sheet goods so this will save so much time. And I can dedicate my festool tracks to cross cuts.

I have a Grizzly Track Saw with a 55 inch guide rail, but wanted a longer length guide to rip 8 foot sheets. After reading several reviews of people joining the shorter guide rails together to get a long rail and the problems they've had keeping them straight, I finally pulled the trigger and bought the Makita 118 inch guide. Because of it's length, I was worried that it might be damaged during shipment, but it came extremely well packed with literally a wooden crate built around it. It arrived in perfect condition. In other reviews, a few people mentioned problems with the straightness of this guide, but mine was absolutely straight. Overall, I'm very pleased with the Makita 118" rail and would definitely buy it again. By the way, it works perfectly with the Grizzly Track Saw.

To be clear, this is exactly as advertised. I wanted it because I didn't want to connect rails for long cuts. It just can't be perfect, right? So I took a chance and got this. And here's the thing, this thing is huge. And unfortunately, that kinda makes it useless. It's important that it not be damaged, but at that length, you have to have it on a ladder rack or whatever, but probably a place where it gets dinged from time to time. Not to mention the fact that mine arrived crooked, but it's so big it was a special van delivery, so seriously, what am I supposed to do? What a hassle. If this is going to stay in your shop, then it might be useful, but a shops usually have alternatives, so what's the point? Just get two of the shorter ones and connector kit, trust me.

I think I've convinced several other folks to get these. It really makes it easy to reduce full sheets of plywood accurately. The extra length makes it possible to slice sheets of plywood at various angles. The Makita track saw that goes with it has great dust control through the vacuum port on it. I lay a sheet of 3/8" flake board on the floor and then sheet of plywood on top of that. Set the depth of cut to just barely reach through the plywood and I can keep reusing my flake board. Now if only my garage floor was more even. *sigh* The chip shield strip seems to have slipped some which is making it a little harder to align. I can get a new one and start over but money's a little tight right now.

Phenomenal price for a precision tool. Frankly, other sellers charge more than the cost here for the shipping alone. I can now build cabinets and built-ins onsite accurately without a table saw.