pitaka for iPhone 16 Pro Case 6.3", Caseless Feeling, Aramid, Black/Grey

I’ve been using the PITAKA case for my iPhone 16 Pro Max and I’m seriously impressed. It’s incredibly slim and lightweight, but still feels premium and solid in hand. The design is clean and attractive without being flashy — exactly what I was looking for.What really sold me was the durability. My phone actually fell off the roof of my SUV onto the driveway (completely my fault), and I was expecting the worst. The phone was perfectly fine. The case only had a few small scratches — no cracks, no damage to the phone itself. That alone made it worth every penny.I switched from a Torras case that I had been using for over a year, and honestly this feels like an upgrade in both design and quality. If you want something super slim that still protects when it counts, this is it.Only Drawback is that there is no integrated kickstand but that is the tradeoff for a super slim design.Highly recommend.

I’ve owned iPhones since the 3G and have upgraded nearly every year. Always been a fan of minimalist cases because I don’t like the additional bulk, and I’m typically pretty careful with not scratching or dropping my phones. I just want a case that’s ultra slim, has added grip since the iPhones are really slippery, and doesn’t have any protruding edges to get in the way when swiping towards the edges of the display.I’ve tried many cases throughout the years, and they all have their pros/cons. The couple of ultra slim cases on top of my list are the Peel/Torras and Spigen Thin Fit cases. While the Peel/Torras cases are probably the thinnest I’ve owned, they offer zero protection other than to prevent scratching, but the biggest issue I have with them is how slippery the cases are. In fact, I found them to be even more slippery than the phone itself. Then came the Spigen Thin Fit, which was actually my go-to for a couple iPhone upgrades. It was thin and offered a soft-touch type of grip which I really liked. Over time, however, the thin portions of the edges such as around the volume buttons would crack, and the corners would start wearing out. These were more cosmetic issues, but the case overall served me well, and I appreciated the stealth black aesthetics.The all-black Spigen case was starting to look a little bland after a few years, and then I came across Pitaka. I’ve always loved the carbon fiber look, and so their cases instantly caught my eye. The price was tough to swallow compared to the other cases I mentioned above, but not too much more compared to the bulkier cases from other name brand case manufacturers. Seeing I’m paying for it only once every time I got a new phone, I decided to try it out, and I’m super glad I did.I’ve been a Pitaka fan since I got their first case for my iPhone 8, and I’ve exclusively bought their cases ever since all the way up to the current iPhone 16 Pro. Their minimalist cases have all been a perfect fit, with enough grip, minimal edges to not get in the way of swiping around the display edges, outstanding aesthetics, and long term durability. I’ve especially always loved how the bottom of the case has zero edges because I swipe up so often from the bottom, but others have disliked the lack of protection. This year, they took it one step further and added coverage on the bottom, but they didn’t make the bottom edge sit as high up as the other sides so you’d continue not to feel the case when swiping up. I love their attention to detail such as this.Another thing they did was embed magnets to this thin case so that your magsafe accessories attach sturdily. In prior years, they had two case models: an ultra thin air case without magnets, and a magsafe case that has magnets but is a little thicker and heavier. This year, they were able to have an ultra thin case with embedded magnets, doing away with needing another thicker, heavier model if you wanted magnets.I’ve had numerous products from Pitaka over the years - from each of their iPhone case iterations, to their car mount chargers and their Apple charging station, and none have disappointed. They’re all carefully thought through to be practical, functional, durable, and to look good. Their customer support is also always super responsive if you have questions or need help. Pitaka will be my go-to for all Apple accessories for years to come.

In the interest of disclosure: I have been using Pitaka cases for almost 8 years now. Starting with the Galaxy S8, then the iPhone 11, the iPhone 13 Pro, and now the iPhone 16 Pro.The good: If you want a good Aramid fiber case, this is a good place to start looking. There are competitors en masse now but in my experience, few are doing it like Pitaka.The bad: Pitaka is making their branding bigger on their cases which reduces the special feeling their case used to have. Now it's just another case with marketing on it. To compensate, the prices have come down. I would pay more for an unbranded case of comparable quality if one existed.The bottom line: There are other makers of aramid cases now. Pitaka is not the only name in the game. But when it comes to cutouts, weight, and finished product, they are the ones I feel most confident in.In past reviews, I have praised Pitakas unwavering commitment to function and design. I have, since using these cases for so long, come to believe the easier it is to hold your phone, the less protective a case can be. While it may not be a perfect case, I gladly take the tradeoff to have a lighter, easier to access phone from my pocket.The case when new is slippery but as its surface becomes "seasoned" it becomes a lot more grippy. The cutouts give my fingers a large index to know where they are with respect to the buttons. Something most cases do a poor job of. This case is a bit of a departure from older stylings that favored angled cutouts in favor of straight cutouts. This has the benefit of reducing exposure as there is more coverage and allows the case to be more tight. The downside is that theres less of a finger ramp to let yourself know where your fingers are with respect to the buttons. We all want our phones to have protection and this case offers some protection. A new experience for me is the metal ring around the camera bump. A nice touch but I have already nicked the sharp edge in a drop and do not expect this to remain looking perfect.If you do happen to drop your phone, as long as it's not from excessive heights, the case will do a fine job in combination with a glass screen protector. Replace it as is necessary. Similar to a screen protector (and any case for that matter), this is a sacrificial layer. If you are prone to dropping your phone this is not the case for you.I miss the original bare styling of Pitaka. I wish they could go back but understand why they may not be able to. And I cannot in good conscience remove a star for a product that is otherwise excellent.

So you get a new phone, open up box and are like WoW. Feels great looks great and the first thoughts in your mind are I need to protect this like a baby. So many cases to pick from that offer minimum protection to maximum protection. Many come with the issue of giving you a poorer quality in hand do to the materials that are used to make the case. You loose that solid premium feel of the side metal and buttons or just rough spots on case. Your phone is protected but you feel like u are holding a candy bar or rough brick. With this design the bulk stays with the cheaper cases and quality thin material of Aramid Fiber (five times lighter than steel and five times stronger) is used here to provide max protection on falls and leaving all the quality that you first felt right where you want it … in your hands and not covered up. The sides of the phone are the least point of impact. When it falls you will hit corners which are all covered, flat back which is covered or face first which I hope you have a screen protector installed. So you are perfectly covered with this case and dont loose any premium feel. There are no rough edges, just smooth comfort in any angle you grab the phone. On top of that, the look is just as attractive as the feel. Thank you for adding the weave collection to add even more flavor to an already attractive case.This case is not just MagSafe compatible but it has built in magnets to add to the MagSafe magnetic pull which is ideal for when you are relying on MagSafe with your car mount. I have no issues at all with this dropping off my car mount when on a bumpy drive.On the inside of the case you see the MagSafe circle and then you don’t see the normal line under it but I was informed that was just a design devision and that strip that I believe works with MagSafe wallets is still built into the case. I have also tried with a MagSafe wallet with no issues. Apple ewallet also works seamlessly with case on with no interruptions of being able to check out with a quick slide on your phone.I have read some reviews about the camera rim which is lifted and protects camera lens when laid on the table. Pitaka made an advancement with it on this variation of cases as instead of plastic they are using metal to offer further protection and avoid any cracking. Some people have mentioned there is a rattle or movement with that metal rim within the case. As you can see with the two cases I have, I was not able to duplicate that issue, with a phone either in or out of case that camera rim is solid in place. I can only assume those were some defective ones during protection and people should reach out to Pitaka for a warranty replacement.Thank You for not only putting all your efforts into your products but also on ways to help protect the environment with your changes to the packaging, made with a 100% biodegradable material.I couldn’t find a better case to compliment my iPhone anymore !! Well done yet once again!! Customer for life !!

I found portals two years ago when I was looking for a super thin case for my iPhone 14 Pro, so when I got the new 16 Pro I knew I had to try out pitakas newest case and it once again blew me away. To start, though this case is very thin and light, it does of course add some weight, but that added weight is welcomed with this extremely light phone. (For the couple of days I had it outside of the case I was always terrified that it would slip right out of my hands)! Along with that it adds a nice bit of grip to the back and sides as well as adding some extra protection and stability over the 14 pro case. The camera protector this year is a natural silver (solving the problem of the paint wearing off of the black painted ones) and when putting the phone down on its back, it feels very stable to type with, not nearly as rocky as without the case. I would also like to point out how portals dealt with the new camera button. Their cutout design works amazingly well, I haven’t had any accidental presses since using this case and you can barely tell it’s there, but when you do need it, the case gives it a ton of space, allowing you to easily slide your finger right across, something that’s been an issue with other cutout cases. I will say though, the sides this year pop out the least they have before, so be warned if you’re using a screen protector, the screen protector glass might make contact when putting the phone face down, but on the positive side, the edges of the case never get in the way! This case is great and I couldn’t recommend it more for someone wanting a thin, sleek, beautifully designed case!

I just got an iPhone 16 Pro, and I was looking for an ultra-thin case that was MagSafe compatible. I was tempted to buy the Torras case for $30 less, but considering the cost of the phone, I decided to go with a premium brand. After looking at video reviews of several ultra-thin cases, I liked this case the best.Ignore those negative reviews that say it doesn't protect the phone's screen. The bezel of the case is just slightly higher than the screen, so there is no danger of damage if your phone is screen side down on a flat surface. If you put a screen protector on your phone, the thickness of the protector raise it above the bezel of the case, so the case will not protect your screen protector.Obviously, an ultra-thin case like this is going to provide on minimal protection from drops. This case is for someone who isn't accident-prone, and will primarily protect the phone from scratches and general wear and tear.The case is super easy to install but difficult to remove. It will never separate from the phone on its own. I tried to follow PItka's removal instructions, but couldn't get the case off. I finally found a video review of the case that suggested pushing up on the inside of the camera array while pulling down on that corner of the case. This allowed for easier removal. The case comes with shims that may improve the fit of your phone in the case, but I didn't see any need to install them.I love the look and feel of the case, with the exception of the Pitaka logo. I wish Pitaka either eliminated to logo or else used darker ink for it to make its appearance more subtle. The MagSafe feature works well and the charger firmly attaches to the back of the case. I like the generous cut-outs that allow you to easily press all the phone's buttons and use the new camera control. The fabric material that the case is made from allows a good grip on the phone; it feels much more secure than without a case.One confusing feature of the case is its NFC chip. The case's instructions tell you to scan the chip with your phone. Scanning the NFC brings up a product registration screen that requires entering the case's serial number. After much searching, I finally found the serial number on the inside of the silver ring that protects the camera array. After entering all the data, you receive a confirmation that your case is legitimate. The whole process seems a bit silly, and needlessly adds to the cost of the case.If you are looking for an ultra-thin case, and are willing to live with the minimal level of protection it will supply, then I highly recommend this one.

I've been using PITAKA cases since the iPhone XS, long before Magsafe was a thing and wireless charging was just getting started. Their iPhone cases are top quality products, and as with all my previous PITAKA iPhone cases, this one is no exception.While I haven't subjected this one to the kind of abuse my previous cases had to endure, the build quality is the exact same, if not better. While the case is extremely thin, it's also incredibly robust. I've never had to replace a PITAKA case due to damage. If you really treat them hard, they'll begin to show signs of wear, but you really have to be hard on them. Even then I've never found a beaten up PITAKA to protect my phone any less. All corners are protected, the camera frame has a lip around it prevent the camera from resting directly on surfaces. The only drawback being it can be hard to clean lint off the camera without taking the case out of the phone, which is only a problem if you carry your phone in your linty pockets. I suggest taking the phone out of it's case to clean occasionally anyway, it's a case after all and not a space suit, lint, dirt, and grease will get under it. It can be a little hard to pry off, but read/keep the instructions the case came with so you remember how, and it's not so hard. There is also just enough of a lip around the edge of the screen so that the display is never resting directly on a flat surface, even with a screen protector on the phone. That said, if it's a particularly rough surface like pavement, well, you'll need something more like OtterBox for that.On that note, if you want all around incredibly thorough "fool-proof" protection, this isn't the case for you. It's sleek and sexy and extremely robust for being as slim as it is, but think of it more like a business suit made of kevlar and full blown knight armor: looks good while providing a reasonable amount of protection vs. looking kind of ridiculous but capable of being run over by a pickup truck.My only real gripe with the case is that they're expensive. You shouldn't need to replace the case if you replace your phone every 2-3 years, though if you're particularly rough on yours, you might want to (even if not need to), but $50-$70 for a case is a lot to ask. To me, the balance of aesthetics, function, and protection are worth it, but it's definitely an investment.TL;DR: If you want a beautiful case that provides about as much protection you can get with a slim barely visible case, this is the case for you.

I recently had the opportunity to try the PITAKA iPhone 16 Pro Case, and it delivers on its promise of being thin, light, and MagSafe-compatible. Made from 600D aramid fiber, this case feels premium while offering a near-caseless experience.Pros:✅ Ultra-Slim Design: At less than 1mm thick, it maintains the sleek profile of the iPhone 16 Pro without adding bulk.✅ Premium Materials: Crafted from 600D aramid fiber, the case provides exceptional durability and a textured grip.✅ MagSafe Compatibility: Works flawlessly with MagSafe chargers and accessories, ensuring a strong magnetic connection.✅ Elegant Aesthetic: The black/grey twill pattern gives the case a sophisticated and unique look.✅ Comfortable Feel: The matte finish and chamfered edges enhance comfort during extended use.Cons:❌ Limited Drop Protection: While it protects against scratches and minor bumps, it isn’t designed for heavy-duty impact resistance.❌ Price: A higher price point compared to basic cases, but justified by the premium materials and build quality.Performance and Usability:This case is ideal for users who want minimalist protection while showcasing their iPhone’s sleek design. The MagSafe functionality works perfectly, making it easy to use with compatible chargers and accessories. The aramid fiber construction adds a premium feel and a grippy texture that improves handling.During everyday use, the case protected my phone from scratches and scuffs without compromising its slim profile. While it isn’t a rugged case, it suits those who prioritize aesthetics and portability.Comparison:Compared to other slim cases like Totallee or Spigen Thin Fit, the PITAKA stands out for its use of aramid fiber and seamless MagSafe integration. Its premium materials and unique design make it a superior choice for users seeking a balance between style and functionality.Who Is This For?This case is perfect for users who prioritize a lightweight, minimalist design with premium materials. It’s especially appealing for those who frequently use MagSafe accessories and want a case that enhances, rather than hides, their iPhone’s design.Conclusion:The PITAKA iPhone 16 Pro Case is a standout accessory for anyone seeking a slim, stylish, and functional case. Its premium construction, MagSafe compatibility, and elegant design make it an excellent investment for those who value both form and function. Highly recommended for minimalists who don’t want to compromise on quality.

Exactement ce que je cherchais, une coque rigide mais fine qui ne dénature pas le look du téléphone et compatible avec Mag Safe.2 points négatifs à mon sens : épaisseur très fine à voir en cas de chute et le prix.Sinon tout le reste est excellent .Je recommande

Superb texture and material. Amazing fit. I have always wanted to buy a PITAKA case for my iPhone and when I did it was the best choice I made. It feels as though there is no case at all.

Después de una caída de 10cm de altura esto es el resultado, que no se te puede caer nunca si no… bastante decepcionado. Pensaba que no perdería color, que mínimo. Por lo demás la funda está bien, es muy fina, la más fina que he visto nunca.

First and foremost this case offers almost no drop protection and is not designed for that. It’s to protect from scratches when laying your phone down on flat surfaces.It is exceptionally thin and very pretty. The cut outs for the speaker, buttons and charger are deliberately open meaning they work excellently. There is a slight lip above the screen which means you can lay it down face down without too many worries. My phone has a screen protector and the lip sits slightly above that too as per photo. The obnoxious camera bump on the latest iPhones is considered and the protection is not much more that it needs to be to maintain the minimal aesthetic.I’ve owned many Pitaka products over the years and the build quality is always exceptional. I’ve owed previous iterations of this case as well and an older one that didn’t have MagSafe incorporated. Because it was so thin it still worked ok but this latest version has MagSafe built in. This is a valuable addition and now works really well.In summary, if minimum design for scratch protection is what you’re looking for then this is ideal. It isn’t cheap but screams of quality and the new designs are very pretty too.

Excelente funda ha aguantado caídas golpes rayones y aunque es ligera y delgada protege muy bien tu telefono el precio lo vale