Okinos Aqua 3, Micro ATX Case, MATX PC Case with 3 X 120mm 3-Pin ARGB Fan Pre-Installed, Panoramic View Tempered Glass Front & Side Panel, with Type C Port, Black

This case is very good. The glasspanels come off very easily. The weight is very nice, its light which helps a lot with portability. I decided to build my current PC based off this case. I dont like the fans that come with the PC as its not controllable. I decided to just get other fans that were controllable. The aesthetics are nice, great for all-black builds. It was surprisingly easy to build around the case as the panels were removable, and again- its weight. My only issue is that the front panel power button is finnicky, sometimes the first press you do doesnt register, having to press pretty deep for it to register. The value for money is very nice, I would recommend this to other people.

Oh my gosh, this computer case is absolutely ADORABLE!!! I LOVE it! It's actually roomy inside for everything I need. It's also very quiet and super clean looking. NO more big and bulky Cases for me. I have TONS of room on my desk now. Here are the before and after pictures. :) The Black case was before. This little White case is over half the size of my other one and I'm just absolutely Loving this. It's 15" Tall x 13" Wide x 8 1/2" deep. (from side to side in the front - 3rd picture) The Top has the metal mesh, and so do 3 sides towards the bottom so that enough air flow goes through, so your pc should not overheat. This is an Amazing PC case and at the very good price as well. :) If you are looking to go smaller on your Computer case, I would HIGHLY recommend this one. :)

Nice and compact case without too many compromises. Cable management is good, and it fits most normal sized GPU’s and CPU tower coolers. Very well built and rivals cases that are much more expensive

Pros: It is cheap, small, and very space efficiency while still looking very nice. Comes with its own ARGB hub. If your motherboard is cheap and doesn't have a 3 pin ARBG, you can control the RGB fans from a button on the side of the case. This was the case for me and it works perfectly - a great feature for cheaper motherboard. However, you still have the option to plug the hub into your motherboard with the provided cable to be able to control the colors with software. Also had an extra slot for one more ARGB device on the hub (your CPU cooler for example). Cons: It is cheap and you can definitely tell. The metal is somewhat thin; however it does not fell un-strudy and is perfectly fine in 95% of places. But I have three issues with this case. The first two deal with the PCIe lane covers. They are unfortunately punch out so you cannot put them back; although the case does come with two extra slot covers so its not too bad. The worse issue is that the holes used to screw in the GPU are not pre-threaded. It is not clear what screw you are supposed to use to secure the GPU since the fine thread motherboard screws are too thin, and the course thread you would usually use are too thick. I had to use the HDD screws and forcibly thread the holes as they were simply drilled in with no thread. And the last issue as many pointed out was a lack of 2.5" SSD mounts. Its not a huge deal, but would have been nice. Conclusion / TLDR: Case looks beautiful, has RGB that is easy to control and is compact, but some corners were cut in the quality of the metal and build.

Cable management wasn't near as bad as I expected and it looks super clean, it's got room for everything which made it easy to put it all together, and pretty good airflow too, def a good starter PC tower especially if you wanna do rgb

This is a great-looking case. The see-through sides are the reason I got it. It looks great sitting on the desk with the RGB. The built-in fans are nice and quiet. All my parts fit great. Cable management was easy with the removable side plate. Very good value!

I was very surprised by the features and functionality of this case. For the money, you really can’t go wrong. The “fish tank” style panoramic glass, the front panel USB type C, the 3 included 120mm ARGB fans, included ARGB hub, and great airflow make this a perfect case for those on a tight budget. The metal thickness is about what you would expect from a sub $100 case, but as long as you’re not transporting it all the time or banging on it, it functions just fine. I will say the fans slightly more noisy than what I want but at least they are moving air out of the case and keeping my internals cool. This case will also fit most of today’s modern full size GPU’s. I have a reference edition RX 5700 XT, and it went in there with about 2 inches to spare. It also comes with all necessary hard to include longer screws for mounting extra fans on the bottom below your GPU (see picture). If you’re looking for a good case and need to keep cost down for your more important components, look no further than this case, it’s got you covered!

This is a perfect pc case, airflow is perfect with almost zero noise. The size is small, which I was looking for, and the cable management is also perfect. The only issue I encountered was with the annoying fan vibration. The issue was caused by resonance, as the fans were running at identical speeds due to being connected through the provided splitter cable instead of directly to the motherboard fan headers. I resolved the problem by plugging each fan into separate motherboard ports and adjusting the fan curves so the top two fans operate at slightly different speeds. I only figured this out after ordering a second Okinos Aqua 3 case from Amazon, and it had the same problem. Now I have to return the extra case.

Lo más compacto en gabinete con vista de pecera. Totalmente recomendable, con buen precio, 3 ventiladores argb 120mm. Excelente compartimiento para todo lo que te plantea. Calidad es buena, conforme al precio. Cuenta con USB 3.0 front panel!! NO se sacrifica espacio para GPU, pero si pierdes en ventilación, unas por otras. Tendrás que definir bien cuál es tu objetivo, si tu interés es el menor espacio para tu PC y además un excelente diseño de pecera, te va encantar. TEMPS con mi ANTERIOR gabinete: CPU: 69c - 71c cinebench20 a 10min. GPU: 60c - 62c en 3dmark steel nomad TEMPS con Okinos Aqua 3 ACTUAL gabinete: CPU: 76c - 77c cinebench20 a 10min GPU: 60c - 62c en 3dmark steel nomad Mi 5700x3d ha aumentado 6c grados debido que no cuenta con ventilación frontal. Sin embargo esta todavía dentro de los parámetros aceptables. Dos puntos extras a tomar: 1.- al ser mi cpu x3d, se calienta mucho más a comparación de una versión X o non-X, si es tu caso, manejaras mejores cifras. 2.- mi disipador no es el más idóneo (cooler master Evo black edition), si le instalas un Thermalright de doble torre te irá mucho mejor. Al no contar con ventilación frontal te da oportunidad de meter GPUs de 33cm o posiblemente de 34cm. Mi Sapphire pulse 7900GRE que mide 32cm entro sin problema. Si tu tarjeta micro ATX tiene la entrada pcie x16 lo suficientemente arriba para necesitar los dos brackets traseros superiores, los 2 abanicos inferiores tendrán suficiente espacio para ventilación e instalación. Algunos tips para ensamblar tu PC en este gabinete: 1.- remover los abanicos superiores para conectar el cable de la CPU, te ahorraras mucho tiempo. 2.- remover los dos cristales templados para poner tu motherboard y en general para toda la instalación. 3.- antes de poner los abanicos inferiores en caso de... Y antes de instalar tu GPU. Conectar todos los cables de tu front panel, ya que después no tendrás espacio suficiente para manipular.

It took a bit longer to arrive, but this is an excellent computer case, professionally designed and well-engineered, highly recommended.

The case is what I would call "DIY customization friendly" and good quality for the price. If you want to DIY install additional front bay peripherals, - like a DVD ROM and a card reader, - you certainly can. In my case I had to do it for a client. I Dremelled the front steel mesh for those, and used aluminum corners to mount both of these to the bottom. Of course, - I had to change the case's cooling scheme because of these DIY modifications (which be warned!) is a " - 3" negative pressure scheme (meaning the 3 fans are positioned to blow air OUT of the case, and air gets passively sucked in from the bottom of the case where there is a mesh. (Which makes the magnetically attached filter to the top of the case - perfectly pointless, filters belong on the bottom where the air goes in). The top filter mesh makes more sense if you choose to do what I did and convert it to +1, -2 negative pressure system (Top front fan blows air inward, the 2 others blow air out of the case, pls. see photos for clarification This is the best scheme if you want to have a large tower cooler with a fan in front. Prime95 testing confirmed this was a viable scheme with temps staying 8-10C below the CPU's TjMax at 100% CPU occupation. The fans are not particularly fast, but they are surprisingly quiet for a budget PC case. The only hiccup (you may want to be aware of) is that only after I did the aforementioned DIY modifications (thereby voiding warranty), did I realize that the fan control PCB was missing a SATA male power to SATA Female power - to 4pin ARGB power adaptor. And while it could be poor QC on company's behalf, it's also true the seller (if different from the maker company) could have checked if everything was included without voiding the warranty before submitting the PC case kits to Amazon handlers/shippers. I decided to take the stars off with seller, since doing so in both reviews would feel too vindictive. If I was somehow incorrect about this - I do hope the seller contacts me so that I would adjust the rating my reviews accordingly. Still, it wasn't cool because I had to either settle for ARGB working for just one fan (not acceptable), or purchase a pack of fans for $40 separately, which is what I did. I could have simply purchased a SATA power cable adapter but it was $26 plus shipping for anything that ships fast, and I wasn't 100% sure the native Okinos board was functional to begin with.

Muy contento con la compra

I had an existing PC that was simply taking up too much room when I switched around my living space and wanted to get a new case. After pondering over the pros and cons of all the mATX cases out there I settled on this one. Being able to remove the front glass plate is a game changer during the build and I won't go back to a typical case again! Note my existing build is using an X79 motherboard so it tends to run hot and with the reports and reviews regarding using a top mounted radiator I opted to purchase a single fan radiator for liquid cooling of the cpu...and that purchase I clouded a replacement case fan controller. With 2x3.5 " Drives and 2 SSD I was not willing to give up on storage...and this case gives ample room to make some creative modifications. I moved the preinstalled case fan to pull air in from the bottom, mounted one of my SSDs on the interior of the case...I have been running at full loads with multiple installs and the Xeon processor is running stable and "cool" at a consistent 49C for the past several hours.