1x Wired 1-Button Push Control Replacement for LiftMaster 883LM

This garage door opener was easy to install and works perfectly. I am very happy with my purchase. It was delivered promptly and in great shape. It's so nice to be able to push the button once and the garage door opens!

Worked perfectly. Easy to install even if you have no electrical knowledge. Did not immediately connect to my garage door opener after completing the instructions. Ended up unplugging my opener for 30 seconds and plugging it back it. After that, the button worked fine.

It works with my Garage Door Opener (the one with the yellow button). However, at least in my case, it was not exactly “plug and play.” It didn’t work when I first connected it. I checked the instructions, followed the setup procedure, and after that it worked without any problems.In short, you first need to unplug the Garage Door Opener from the power outlet. Then connect the Push Control button to the existing wires. Make sure to connect the red wire to the terminal screw on the button labeled “RED.” If, like in my case, the existing wires happen to be blue and white and there is no red wire, simply check the control panel on the Garage Door Opener and see which wire is connected to the terminal colored RED. Connect that wire to the RED terminal on the new button.Next, plug the Garage Door Opener back into the power outlet. The light will flash- I don’t remember exactly how many times.After that, press the newly installed button three times. On the third press, it should activate the Garage Door Opener.Overall, a good product.

Easy install. Appears identical to replaced oem button, including backlight.

Easy to install, it took me less than 10 minutes to get it installed and working. No problem with compatibility at all, as soon as I connected the wires it worked, I didn't even have to do any programming.

garbage', doesnt want to work with MyQ new Chamberlain garage door opener. I wanted this as an extra button by the door. i tried every scenario including wiring. tried syncing it to no avail which you should nothave to do with a push button. even tried reverse polarity. all it does is flash. also took five days to get here.

Good replacement button for a really bad garage door opener. I do not like liftmaster but I do need parts to replace when the original bad parts go bad - this will serve as a good replacement. Cheaper than buying a better garage door opener.

Had to get this with new Chamberlain D2101 since old wouldn’t operate it. Easy to install used the old wires from the Liftmaster.