EZ Fit [2 Pack] Screen Protector for iPhone 16 Plus/15 Plus

The Spigen EZ Fit screen protector is excellent and was incredibly easy to install on my iPhone 17 Pro. The alignment tray makes the whole process simple, and the protector went on perfectly with no bubbles or dust trapped underneath. The glass feels smooth and clear, and touch sensitivity is just as responsive as it was without a protector. It also fits really well with the Apple TechWoven case. Once the case is on, the screen protector is barely noticeable at all and looks very clean around the edges. Overall, it feels like part of the phone rather than an added layer. Great quality, easy installation, and definitely worth buying.

My previous screen protector for my iPhone 16 Pro Max cracked, so I needed a new one. I tried a couple of cheaper replacements, but they were plagued by bubbles. So I paid a little more for this Spigen protector. It comes with a fitting guide made of rigid plastic, glass cleaner, small microfibre cloth and a dust remover. I recommend watching the installation video (there’s a QR code and a website address to find this. Simple and easy to follow.) The result? Brilliant. Following the instructions, installation was easy, and the provided anti-bubble tool removed all the bubbles. So I now have great bubble-free visibility: I would not know there was a protector fitted. The touch screen responds as it did before the protector was fitted, and I am confident that the protector is durable. Oh, and there are two protectors included with all the extras. Great value for money.

Great quality. Quite strong. Touch sensitivity was not affected so that's nice. Easy to install. Fits the phone perfectly.

Easy to install, good quality, just a little bit pricey

I always buy these tempered glass. Easy to use and last long. It's also easy to apply on your phone. The cleaning pads it comes with also is very effective. The phone looks great after application and the quality of the screen is not affected by it.

Perfect , really easy to fit and no bubble once you push them out with the tool. The first one i used did come with a chip defect but contacted spigen who sorted how a replacement, great service.

I always find screen protectors annoying to apply, these are so much easier with the guide. Perfect application first try. Nice oleophobic coating makes its feel like the actual screen. I won’t bother with the cheap screen protectors again, these are definitely worth every penny.

Having dropped my iPhone 16 Pro onto my Nord keyboard this morning, I was relieved that the screen protector took the shock of hitting the projecting pitch bend stick and despite breaking quite badly, my iPhone screen was untouched and without a mark. I immediately needed to order a new protector and this Spigen Glas.tR EZ fit seemed a good choice. At £18 it is on the expensive side but you do get 2 protectors, easy application frames, cleaning wipes, dust removal stickers, a squeegee tool and microfibre cloth. Just as well as I ended up having to use both. Following the instructions carefully I thoroughly cleaned my phone screen with the wet wipe included, dried it with the rather small microfibre cloth and ensured there was no dust present. The packing foam around the included squeegee provided a handy spacer pad to accommodate the camera bump when resting the phone on a flat table with the cameras facing down. I immediately pealed off the backing paper of the screen protector inside the applicator frame and lowered it over the phone screen. After applying pressure in the necessary places as indicated and waiting 30 seconds, I lifted off the applicator and peeled off the remaining protector film. Despite my best efforts I ended up with a few small dust specks that create bubbles under the protector. The squeegee wouldn’t fix them so I managed to peel up the protector at the edge and use the dust removal sticker to clean the specks off. Unfortunately in doing that the protector came off and I spent quite some time trying to realign it manually by eye. This resulted in more dust and marks, so I ended up starting again with the second protector. Things went a bit better with the second one, but again dust bubbles! Eventually with patience and more luck I ended up with a perfect fit and no bubbles or trapped dust. However that meant I needed to use both protectors. The end result looks excellent although the protector is quite a bit smaller than the screen so leaves about a 1mm gap of exposed screen glass. That said once a case is fitted it looks ok and should provide full protection. It also ensures the protector isn’t overhanging the bevelled edges of the iPhone glass. It feels very smooth though and you wouldn’t know there was a protector without very close inspection of the edges. Image quality is the same as without the protector. In summary I’m a bit miffed having to use both protectors. Dust and bubbles are still a huge challenge when it comes to screen protectors. The applicator frame helps with alignment but won’t eliminate dust. That said £18 is a small price to pay compared to a replacement iPhone screen.

Great, fits perfect and no bubbles

iPhone 16を購入したタイミングで、Spigenのガラスフィルムを選びました。ケースもSpigen製にしているので、相性の面でも安心感がありました。 この製品の特長は、なんといっても貼り付けキット付きであること。位置合わせが不要で、キットに合わせて置くだけでぴったり貼れるので、貼り付けに自信がない方にもおすすめです。私も気泡ゼロで一発で綺麗に貼れました。清掃用のキットも付属しているのも嬉しいポイントです。 半年以上使用していますが、画面に傷はほとんどなく、指紋汚れもサッと拭くだけで取れるので非常に快適。丁寧に使っているとはいえ、ここまで綺麗な状態を保てるのは、ガラスフィルム自体の耐久性の高さを感じます。 透明度も高く、動画や漫画、電子書籍を読むときも画面がクリアで見やすいです。タッチ感度も問題なく、操作もスムーズ。表面はさらっとした触り心地で、操作時のストレスもありません。 2枚入りなので、万が一割れてもすぐに貼り替えられるのも安心です。価格はやや高めですが、貼りやすさ・使いやすさ・品質の高さを考えると、納得のいくクオリティだと思います。 ガラスフィルム選びで失敗したくない方には、SpigenのEZ Fitシリーズを自信を持っておすすめします。

Spigen’s tempered glass fit for the iPhone 15 Pro is excellent, it doesn’t have any borders which will expand the bezels, and any tight phone casing will not lift the screen protector up. However, this means that there will still be a slight gap for dust to creep in. I have been using their tempered glass for a long while and each pack has 2 pieces. The easy application tray helps cut down the application time. I don’t usually have a problem applying screen protectors myself but this makes it super easy. Squeegee included in packaging helps smooth out all the bubbles. The dust sticker included is also generous. I just use the biggest piece to lift up all the dust particles before application. And best part? Each piece lasts me 2 years before the coating wears off and I need to replace them.

As capas e películas desta marca, são muito confiáveis, por ultimo usei uma capa para meu iphone 14 pro, original da apple, o telefone quebrou a traseira toda. Quando usei a capa da spigen em meu modelo anterior, nunca tive problema, com inumeras quedas, o telefone sempre esteve protegido

I recently purchased the Spigen Tempered Glass Screen Protector for my iPhone 15 Pro Max, and I've been quite pleased with it so far. The installation process was remarkably easy, resulting in a completely bubble-free application. This is a major advantage compared to other screen protectors I've struggled with in the past. One of my main concerns was compatibility with my Otterbox Strada Folio case, but I'm happy to report that it fits perfectly. There's no interference along the edges, and the case closes properly with the screen protector installed. This is crucial since many screen protectors claim to be "case friendly" but still cause issues with more substantial cases like the Otterbox. The glass itself has a premium feel to it. The surface is smooth under my fingers when swiping and typing, maintaining the responsiveness I expect from my iPhone's display. The clarity is excellent as well - I can't detect any reduction in screen brightness or color quality. As for scratch resistance, it's too early to make a definitive judgment. The 9H hardness rating sounds promising, but only time will tell how well it holds up to daily use. For now, I'm enjoying the peace of mind knowing my expensive iPhone screen has this extra layer of protection. The 2-pack provides good value, giving me a backup for the future or in case I make a mistake during installation (which thankfully wasn't an issue thanks to the easy application). Overall, if you're looking for a well-fitting, easy-to-install screen protector for your iPhone 15 Pro Max that works with an Otterbox case, this Spigen option is definitely worth considering.