GROHE 46048000 | Cartridge

Great quality. As described. Arrived on time.

After about ten years the cartridge in my Grohe Minta Touch tap failed. This cartridge arrived quickly (next day) and restored the main mixer in my kitchen to full functionality. It was a breeze to install (one allen key and one phillips screwdriver required to install in my case). And I have the peace of mind of using a quality part. I just hope this one last as long - or longer - than the original.

Perfect replacement.

The lever on my Grohe Touch shower valve had been getting stiffer & stiffer recently, which is a bit disappointing, as it's less than 5 years old. Rather than replace the entire valve, I decided to replace the cartridge, which costs about 1/3 as much as a new valve. The most difficult part was removing the lever. After taking out the rubber plug, the grub screw can be removed using a 3mm Allen key. I pulled & pulled at the lever, but it wouldn't budge. In the end, I sprayed some WD-40 into the screw hole, and let it work for an hour or two. Then, I placed a wooden wedge between the top of the lever and the tap body, and by pulling on the lever, it eventually came off. You need to be careful, as the plastic domed cover under the handle can easily be damaged. After this, the domed cover can be carefully flipped out, exposing the front of the cartridge. The cartridge is simply held in place by 2 Philips screws. Having removed the old cartridge, it's a good idea to clean the flange area at the back of the tap to get rid of any limescale or other deposits. The new cartridge comes with a few extra bits, presumably for other models of tap- an extra plastic lever adaptor, a round plastic ring, and some extra-long screws. The instructions explain what these are for. It's very simple to fit the new cartridge, but it's important to make sure it's seated properly with the silicone gasket sealing against the waterways, or you'll get leaks. The metal plate goes over the front, and the cartridge is secured by tightening the screws. After fitting the domed plastic cover, the lever can be slipped onto the spindle & the grub screw tightened. I smeared some silicone grease over the spindle & plastic adaptor, to hopefully make it easier to remove next time. The valve now operates much more smoothly, and doesn't stick. I'm very pleased with my purchase, although a little disappointed that the original cartridge failed so quickly in the first place. Also, the delivery time from Amazon was a little slow at 5 days. I've knocked a star off for those reasons. Otherwise, I'm (hopefully) looking forward to at least another 5 years of trouble-free service from my valve.

You would think this would be a like for like swap, old one out, new one in. We got a professional plumber to do it, one of the best we know. His view was that it was rubbish, it did not fit well and the result was that the controls for the tap were loose and poorly fitting. Took the new one out and put the old one back in and the controls are back to normal. Poor!

Parfait

Perfekt what can i say about it.

Loved my Grohe kitchen sink faucet. Unfortunately, my water softener released some fine particles into my household water supply, and I could not flush it from my kitchen faucet. I had to replace the faucet and went with a less expensive brand recommended by the plumber. However, this valve worked well.

Cartuccia di ricambio originale Grohe, perfetta per la mia vasca da bagno. Il montaggio è stato davvero semplice e immediato, tutto si è adattato alla perfezione senza bisogno di modifiche o adattatori. La qualità dei materiali è ottima, come da standard Grohe, e il funzionamento del miscelatore è tornato fluido e preciso come nuovo. Un ricambio che vale ogni euro speso, consigliato a chi vuole mantenere il proprio impianto sempre al massimo dell’efficienza.

Hög kvalité