120 Grit Sandpaper Roll, 3 Inch x 49 Feet Emery Cloth Roll Aluminum Oxide Abrasive Paper Roll Continuous Sandpaper for Metalworking, Woodworker, Furniture Repair, Sanding Automotive Plumbing

My husband was satisfied with this sandpaper roll, he said it was easy to use and the fit was perfect. And also the cutting was easier.

Just what I needed for my drum sander.

Love the product and idea of cutting the length to my specific needs for my SuperMax 19-38 drum sander... wished it was 50-foot roll as the remaining strip left to cut came up a few inches short and having to waste nearly 9~ feet of the roll and not having an extra 6 inches to make another full-length strip to work. Be happy to pay a little extra for the 1 additional foot of length. Most of us with drum sanders have the 19-38 model and it's just not enough length to get the last of the available roll to make a final strip to use. Please consider making the roll 50 feet.. and charging a little more to get full value on this.

Gritted as stated

Easy to install

Works great, very reasonable 2nd purchase

I ordered three different rolls; 80 grit, 120 grit and 240 grit. Of the three rolls the 80 grit and 240 grit did measure 3 inches in width. The 120 grit roll however did not. It was instead only 2-7/8 inches wide (2.875"). The rolls all state that they are 75mm wide, (2.9527") but that 120 grit roll was 73mm wide. While that may not seem like a significant difference, it made it very frustrating to try and get it to wind correctly on my 1632 drum sander. I wish I had measured the width before cutting a strip to length, as I cannot now return the roll. The backing on the rolls do not indicate the country of origin, however there were some Japanese characters printed on the paper label on the plastic wrapping that the rolls came in. That surprises me as I would expect Japanese quality control to be exemplary. Perhaps the company is Japanese but has the products manufactured elsewhere that quality control is lax. I would also add that the cloth backing is quite flexible, J weight, unlike most other abrasive belts which tend to be stiffer backing, X weight. It does make it quite easy to wind onto the drum, but it remains to be seen how that will affect the durability of the abrasive. Just bear in mind that sanding drums are manufactured according to a specific, expected width of the abrasive in order to wind correctly on the drum and meet the attachment points. A difference in abrasive width may require some calculations in order to try and adapt it to the drum.

I purchased several rolls of different grit for my drum sander. The grit was fine but the width was incorrect. I ordered 3” wide and I assumed it was 3” wide. I was dense and could not understand why I could not properly wrap the sanding drum with some of the rolls. When I measured some of the rolls they were 1/8 and larger over 3”. This does not seem like much but the error is additive as you wrap a drum. I made a jig to trim the rolls to 3”. Some of the rolls I purchased were 3” and some of them were over size. Check your width before wrapping a drum sander

Works great in my drum sander for thinning guitar woods. Seems to be almost tear proof.

It is what it says it is.....sandpaper. Good quality.

Works well for sand paper. Not as strong as I had though but get the job done

Not good quality