HOTLINEGAMES Controller Grips Compatible with PS5 Dualsense Edge, PlayStation 5 Controller Accessories, Skin Kit, Anti-Slip Grip Tape, Sweat-Absorbent, Easy to Apply (Handle Grips)

Okay so I ordered this for my dualsense edge controller its black and the fit is insanely accurate!! The color is black like rubber and feels extremely good in the hands. It feels pretty durable and will absolutely keep the remote from slipping out your hands. The best tip I can give is to clean the controller very well and take your time with the application I spent about an hour putting them on and it came out PERFECT. Inside the instructions is a QR code that links to a YouTube video to assist in the installation order and process. I'm surprised this grip is cut so well its very impressive. The material is very thin so should be no problems with the back paddles and also the cover for the stick modules still pops off with no resistance. Id highly recommend this for anyone who wants good grips for their dualsense edge. Also the sticky material is made by 3M so it is removable and does not leave residue or mess up the controller surface. As for the bottom side grips I just laid the material over the rubber grips that are built into the controller it went on with no issue perfect fit. If your looking for grips for your edge this is the one it functions great!! And for 11$ you just can't beat the price its a great value. Just get um. I included a video and some pics for what it looks like when installed correctly.

I bought these grips as a way to replace the DualSense Edge default grips. After owning that controller for barely a year, the original grips get bubbly and in typical Sony fashion aren't replaceable. These grips from Hotlinegames saved the day. The grips are solidly built, feel fantastic, and provide even more superior grip than the original Sony ones. They also look absolutely sick in my opinion. Putting these on takes a bit of time, but you have two main options: - Stick them on top of the degraded original grips. This is quick and works well, but you might not have as seamless of a fit as might be possible. - Painstakingly remove the old grips, and stick these afterwards. This is more time consuming, but its what I did and what I would recommend if you can spare the time. It fits more snugly and looks like it was part of the controller to begin with. I did have to slowly chip away at the old grips carefully with a knife, and then sand it down a little bit to get the residue grip chunks off to try and get it as flat as possible, but trust me - its worth the effort if you want these to look and feel at their greatest.

I recently got the Dualsense Edge controller to replace my standard Dualsense controller. I had installed a Kontrol Freek grip on that controller, it helped widen the controller for my hands and added grip, but I didn’t like how the application didn’t go as perfect as I would have liked as the skin had a bunch of wrinkles in it. Using the Edge without a skin just made it feel smaller to me, and a bit slippery in hand. There are limited options for these grippy skins for the Edge controller but luckily this one is just about perfect. The application is much better since it comes in multiple pieces to provide more relief for the material rather than trying to wrap the entire piece around the controller. The grip is phenomenal as it’s almost like a rubber, it just offers a lot of grip compared to other ones that feel more like a foam with a fake leather layer on top. On top of all that it looks great too so now my controller feels perfect in hand, offers a secure grip, and installed perfectly. Well worth the money and I will now consider this brand for future controller grips and accessories.

EDIT : Removed one star. So it’s been about 10 months and the back piece is starting to dull out and move/peel a bit, letting a bit of adhesive come out. I do game several hours a day and tend to get sweaty hands but wish it would’ve lasted a bit longer. It still works for now. I still like the product and have ordered another set for now until I can find a better solution. Might have to try one of those ugly and bulky skins … ORIGINAL REVIEW : So if you’ve owned the Edge for a while you most likely have the back grip area start to bubble up. Just like the poor quality joysticks that drift, Sony decided to use this cheap material to create more issues. I bought these to replace the back end of the grips. I didn’t place it over the OEM skin or use any of the other pieces. You can check the photos I added to check it out. The back piece is 95% a perfect fit. It slightly extends on the front when installed the way I did it BUT it fits perfectly flush on the side where your hand grips so it’s a non-issue. Adhesive is extremely sticky and the rubber feels premium. If you use it the way I did, the only hard part is peeling off the original skin. Takes a lot of force but take your time and a sharp knife to help out and make sure the surface is as clean as possible before applying the new skin.

I always stayed away from things like this because I kept my controller basic. But I bought the Edge, and the back pads started peeling off. And it bothered me, so o found the Reddit thread mentioning these, and got them just to swap out the back. I ended up liking the look and feel so much, I added all the pieces except for the buttons. Really happy with the end result. I sawed off a tiny little piece of the 2 front ones, to prevent over lapping. But they cut them about as close as you can to being a perfect cut. It just comes down to how close you apply them. Excellent product (so far)

Install instructions are clear & easy to understand. This provides a markedly improved & textured feel and a more confident grip on the controller itself. If like me, you have a DualSense Edge controller, you're probably aware of the issues with the "under grip area" which is a sort of rubber/leather material that easily stains and shows "bubbling" after regular use. Eventually it peels off. Not exactly the build quality expected from a $200 controller. There's no way currently to fix this, and it seems Sony honors complete controller replacement under warranty. But an alternative option is to use these sticker grips over them, which not only improves the feel and grip immensely, but seems to help prevent the under grip material from deforming further. I highly recommend anyone with a DualSense Controller to get these grips and apply them.

I didn’t care for these that much. They were kind of a pain to put on as far as lining them up correctly with the correct curvature. The feel was ok just didn’t go on like I wanted to and once on hard to remove to readjust.

If you are looking for some great bang for your buck for you grips you are in the right place these grips are high quality and feel amazing when in gameplay, the durability is so good was real easy to install for the price it is a great product stop overthinking. If you are a sweaty gamer grab you some of these they won’t disappoint

بالمرفقات كود رقمي تفتحه بالجوال وتشوف تعليمات تركيب اليد وسويتها وكل شي سليم ومتماسك

Very good quality controller grip. Feels very grippy and comfortable. Mainly used it for fifa as it helps a lot in sweaty games. Would recommend for competitive online gaming like fifa and call of duty for better gaming experience and more grip of your controller.

I got these grips originally because I was recommended these when trying to replace the original DualSense Edge's "grips". I didn't have much opinion on them until I started checking out the product and experiencing them on the controller itself. After having played on them for several days, these are EXCELLENT for 3 reasons: ↪ The grip textures are the utmost priority in these types of products, and these deliver. They are super grippy, yet, have a "soft touch" to them that make it extremely comfortable to play on for several hours. ↪ The cut-outs are extremely precise in their shapes. The bottom "grip" portion cutouts are perfect, so if you are replacing them like I did (in the photo), then these will fit seamlessly. Grooves and gaps are present which helps to prevent overlapping or folding that happens due to the curvature of the controller ↪ The adhesives they used on these grips are extremely sticky. You have to be careful, but installation process is straight-forward and very much form-fitting. Aesthetically, all the edges line-up beautifully and sits flush. TL;DR - They are grippy, yet, comfortable. Cut-outs are precision-made, and the installation process is easy. Perhaps more than my words, my photos will do these justice.

Top!!!

Aparte de que hace que el control se vea super chingon, ayudan con el agarré bastante, 100% recomendadas 👌🏻