POE5003-G

Gigabit version - 2 port. Acts like POE powered 2 port gigabit switch- with POE passthru. I haven't used it for POE power (on the outputs) , but have not doubt it will function as such. I used POE power switch on one end and (this) POE extender on other side of single ethernet line to avoid running another ethernet cable. I'm getting full duplex gigabit speeds on both ports from the extender. No need to plug in the extender, which is convenient , since it uses the POE power input. Device is very compact. Overall, nice way to avoid running more ethernet cables if you >already< have POE power to input to extender.

Excelentes productos

I bought this POE extender to split one Ethernet port to two devices. The Ethernet port has POE (necessary to power the extender). The devices attached to this unit are not POE devices and work fine.

I purchased several of these net splitters to use with 2 cameras. This is the first one that actually works. I started with a much more expensive unit and it probably would have worked but the unit I received was dead and never powered up. After that I tried several economical units and this Revotech is the first one that actually worked as advertised

I had an IP camera on a cat-6 cable that was 520' long. The camera would start to boot up but was only receiving 3.5 watts and needs 5.5w to operate. I found this non-powered mid-span repeater and for the price, thought it was worth a shot. I skeptically spliced the device into my cable (RJ45 Mod ends) about 225' into the 520' cable. When I reconnected the cable, I saw the lights on the REVOTECH light up and by the time I could get the scissor lift over to the camera (it's mounted 35' up) it was up and operational. I have already purchased more of them for another camera at this same site and for future use. FYI...I was connected to a POE switch at the headend that supplied 25w. The camera auto-negotiates the wattage it needs, in this case 5.5w. The camera tester (Trend networks RV171000) indicated I had 12.5w of available power at the far-end. If the cable passes all tests but fails on length, this will probably fix your issue.

I have an application with a PoE camera, as well as a cable going to a sprinkler box having a 12v DC PoE splitter (which powers 2 sonoffs and 4 motorized ball valves), so very little idle current. Even with no DC devices, this extended will reliably power the camera, but not reliably power the 12v splitter. And I have a second one that does the same thing (seems worse when it's above 80° out). So this isn't reliable for powering even low current 12v DC Splitters.

Funciona de maravilla!

Easy to use but appears a little light weight for outdoor use.

Used this in a local community building to enable the daisy-chain connection of 2 or 3 PoE devices where it wasn't possible to install multiple individual network cables back to the main PoE switch. Nice small unit that tucks into a small space (used double sided padded tape) to conceal it.

I bought this to try out and with the hope of saving my self a alot of work running a second cable. It works well but does need some extra configuration on the cameras and recorder. As it did not work as plug and play first time. For me this method worked using a Hikvision NVR a 2 4K cameras Plug camera 1 in only and assign a static IP then remove cam 1 and plug in cam 2 and assign static ip. Then you can plug both cameras back in and goto recorder. Turn off plug and play and select manual adding. fill in the IP address for cams one and two on your chosen channels and both should be displayed. At first I didnt do this and the images on the recorder kept switching between the two cameras possibly due to an IP conflict. Also the device just about fits in a 100x100x50mm junction box. But is quite tight so would recommend a larger box Cannot say how reliable it is because I have only just fitted it

Il s'agit d'un petit répartiteur POE avec 1 entrée POE pour 4 sorties POE. La puissance de sortie est 30W et l'entrée 60 donc faire attention à ses besoins. Très simple à mettre en place. Pour ma part, il m'a servi à brancher deux caméras et une borne wifi. LE débit est correct et pas de difficulté particulière. Il est très bien fini. Prix environ 50€ ça reste correct

防犯カメラ用で使ってます。 通常であればカメラ1台につきLAN1本の配線が必要ですが、これを使うと意外と消費電力的にも使えます。 2台分の電力供給がこれで出来ます。 つまり配線の引き直しが要らず、割って使えます。 赤外線で夜2台稼働してても使えます。 耐久性は分かりませんが、とりあえず2ヶ月は稼働してます。 配線の追加をしなくても既設の付近で増やせるのかかなり手間が省けて助かります。

Me vale para mi camara Poe. Muy util .