Fractal Design Focus G - Mid Tower Computer Case - ATX - High Airflow - USB 3.0 - Window Side Panel - Black

Plenty of room, cables fit easily, I didn't even ziptie them down and the back panel slid on with no trouble. Cable managment is decent, only ones I can see from outside are the GPU and MOBO. Airflow is great, lowered my temps significantly though I put the 2 fans on the back/top pulling out (ik, not ideal, VRams overheating and that gave the best cooling till I can buy more fans) Plenty of room, Have a cooler master 212 and Morpheous 2 cooler (980ti) and they have plenty of clearance. The front filter is quite easy to take off if you'd rather have the extra airflow, you just bend the tabs straight, slide it out, remove the filter, put the mesh back on and push the tabs back/tighten them with pliers, 5 minute job. The blue is a great colour. I really really like the blue. It's like, it almost looks like a stock office case but then it's full of little quality touches, it's really nice but not extravagant, understated. Comes with more screws than you'll need and a handy little tool which makes installing the mobo standoffs easy. very nice touch and much appreciated (though I forgot about it till I'd put them in already) will easily fit a watercooler Improvements that I think would perfect this case Make the 5.25 bay removable, can't see that bumping the price significantly. (I'll just drill cut mine out which is easy if you have a drill, dremel and a steady hand) plus will allow an extra 140/120mm fan on the front. Add more points on the rear to zip tie cables (very little extra cost in this step) The panel screws on the rear are a bit finicky, not much of an issue, especially for someone who barely opens their pc, but improving them a little would be a nice touch. Overall I highly recomend this case. If you just want a quality, good looking high functioning case without spending £100+ this is it. Keep up the good work Fractal, you're cases are above an beyond, You're engineer and artist are either the same guy or both have a solid understanding of PCs, thank them both for all us poor gamers who can now put another £50 towards a new watercooler to OC the balls of our aging i74790ks.

I have 2 of these purely based on how effective they are at air cooling. They look ok, they are sturdy, good value (the hdd light is brighter than my phone torch so you may want to choose to leave those cables unplugged!!) Delivery was prompt. The sheer compatibility is great, almost all fan areas can house 140mm fans, the front panel is one massive grill to maximise airflow in and this is by far one of the best cases for keeping components cool i have owned. Cable management is good and it looks great when set up but remember this is a practical case, not a designer gaming case (though i bet it will perform just as well without the price tag) - i personally removed the hdd stack and hid my ssd drives elsewhere and as i dont have a dvd drive i have fitted an additional 2x small fans in the drive slot for a total of 5x 140mm fans (2 top, 2 front, 1 bottom), 1x 120mm back fan - it fits an evo 212 cpu cooler with room to spare and a rtx 2070, again with room to spare. Ryzen 5 3600x over clocked to 4.25ghz runs idle at 12-15oC so if keeping cool is your thing - buy it!

Bought this to recase and refurbish an older desktop system for home use. Thanks to this case it was one of the easiest DIY jobs I've ever undertaken. Plenty of internal space with sensible cable routing and cooling options and is decently built. Good value for money overall. This is an older style case so it still has the room for two optical drives, perfect for what I needed, but conversely has hard drive bays optimised for the larger 3.5inch hdd rather than the more modern 2.5inch sdd type hard drives, and there are only two bays. However you can pick up cheap conversion brackets to fit two ssds into one hdd bay so that's not a deal breaker for me. Overall would thoroughly recommend.

Lots of room and easy access from both sides, a great base to start a build. The two front 5.25 slots are a rare thing nowadays but they give you great options to house any breakout boxes you may have. I used mine for an optical drive and Sound Blaster front panel break out box with midi connections. Lots of fan placement positions for various sizes around the case to suits all kinds of builds. My only nag would be to include a 2 to 1 connector for the front fans as extra connections on the motherboard may be limited. The included fans are nice and quiet and will get you up and running. Nice quality build with some quality materials, it feels really sturdy. I'm going to be using this style case again for another build it was so impressive.

This case is pretty much perfect for what I want, prioritising airflow and compatibility. It fits micro or full ATX motherboards, two 5" drives with optional front access and has two easily removable 3.5" drive trays. The case sides hook in on the front edge and have captive screws, a nice feature, although lining them up to screw in can be tricky. Case IO includes a USB3 port and is on the top front edge, angled slightly forward for easy access. The case is deep enough to take all but the largest CPU coolers, with the specs saying 165mm max height, which is only true if the cooler is under the window. For fans, you can have 2x 120 or 140mm in the front, 2x 120mm at the top and a 120mm at the back. The case includes 2x three-pin, white LED, 120mm fans on the front, which run quietly. The front panel is removable to clean the mesh and separate from the case IO and fans (unlike my previous Fractal case), although I found it catches on the front plate of the DVD drive I installed. The top fan mounts have two 120mm filters screwed in (also have holes for 90mm fans I think). The bottom has a coarser filter clipped into place, covering the power supply and drive cage area, which should catch fibres but probably not dust. The 3.5" drive cage is a neat setup, with two clip-in trays that have pins in rubber grommets that hold the drive, providing both screw-free installation and vibration damping. If you have 2.5" drives, you can screw them to the tray, including on the underside so you can still fit a 3.5" on the rubber mounts (I have four drives on the two trays in this way). I recommend buying a 3.5" to 2.5" adapter if you aren't putting a 3.5" drive in the tray, otherwise it's a bit loose. This cage can be removed (four screws on the bottom, one screw to the motherboard tray) for long power supplies, an extra 120mm fan on the bottom or even better airflow. Cable management is decent, with plenty of cutouts in good locations for my microATX board. Some of the cutouts have rolled edges and none of them are sharp, but no rubber grommets here. The space behind the motherboard tray is sufficient, I'd have liked an extra half a centimetre or so of depth. There are a few anchor points for cable ties, enough to hold things in shape but not enough for beautiful layout. The case feels pretty sturdy and is well finished. As well as some extra cable management space, a cover for the power supply and drive cage would give it a more polished finish. However that's something I can add pretty easily if I want to, and not having it makes building and using the case easier. Considering everything else this case does well at less than £50, I'm very happy with it.

As others have mentioned, it's a great case for the price. It's well designed with ample room for pretty much any setup. I bought this as a gift as I'm building a pc for my niece, but I really wanted to buy the white version but it wasnt in stock. So i had to opt for the black case as it was the only one available, and it literally was the last one available at time of purchase. Being constrained to a time frame of a couple of weeks to her birthday, I didn't want to take the chance so i opted for the black version so I could build it in time. The pc is now built so I can't exactly return it for a different colour, but it would have been nice to see an expected stock replenishment date instead of "in stock soon", because I would have waited for the preferred white version if given a date. Regardless, I got a good product, it ticks all the boxes (having a cd/dvd drive bay was essential) and I hope my niece likes it as teens these days are extremely fussy over small things like colour or brand names :)

I have been looking at this case for a while as one of the few to retain 5.25 drive bays.. I still have some fan controllers that utilise the 5.25 bays and I grew up with CDs and DVDs and have a large collection.. The case is really well thought out.. I bought a white one to match another white case I have another PC build in already.. the fan arrangement really is optimal.. if you air cool like I do.. the hard drive cage can be moved forward and a bottom intake fan installed as well as the top exhaust which in my experience helps overall airflow quite a bit.. If you wanted water cooled and all nvme drives on your build.. the hard drive cage could come out entirely.. if you use MATx boards in here then you'll have loads of room but full ATX fits just fine but snugly. Overall it feels quality with nice touches like captive screws on the side panels.. in this price range that's great.. the IO is recessed slightly but somehow still didn't line up spot on with the motherboard.. integrated IO shields on new motherboards may prove better.. For a general build with good airflow and a clean aesthetic without bling.. this case can't be beat for quality.. ease of build.. overall features.. I'm really happy with it.. first time builder.. try this.. office build.. yes.. decent air cooled gaming rig or AIO.. for sure.. I really like it.. lives up to expectations Thanks Fractal

I bought this case as my graphics card was suffering with high temperatures and I had always wanted a white case as I think it looks more modern and cleaner. Installation was tricky and it took me a few hours to put everything together and try keep it tidy. I initially struggles with the brass standoffs as they only turned halfway then required brute force to fully screw into the case. I ended up with a big blister doing this as the case doesn't offer enough room to use a wrench. I got everything installed and the case offers a decent amount of size and is fairly Intuitive in terms of layout. Unfortunately cable management at the rear of the case is severely hampered by the bizarre decision to not have the rear case wall featuring a depth area to allow cables to hide behind. The rear case wall on my case simply won't shut now due to cable thickness, which is a real shame as the interior is very clean and clutter free. In terms of temperatures and airflow this case is brilliant, easily the best I've ever used. My gtx 980ti at full load is under 50c which for an air cooled graphics card is frankly unbelievable. Given this was my main reason for using this case, I would say the benefits outweigh the drawbacks but I wouldn't look forward to using this case in future if building for someone else. Pros: Excellent airflow Aesthetically beautiful 2x 5.25" drive bays for disc drive/fan controller Low price case Cons: Motherboard standoffs extremely temperamental to install. HDD caddy is too close to front of the case meaning you cannot use a 4th fan on a front 240mm radiator. Rear cable management is impossible due to no depth from the rear case cover and virtually no cable tie anchor points. Only 1 SSD mount point on the rear. All in all I would say the benefits of this case in terms of looks and airflow/low temps outweigh the negatives given the price, however be prepared for a frustrating build if your looking to do some cable management.

Pris pour remplacer un Carbide 100R qui ne pouvait pas contenir un watercooling à 2 ventilateurs, je suis franchement pas déçu de mon achat. L'espace à l'intérieur est beaucoup mieux pensé que sur le Carbide (notamment avec les disques durs un peu éloignés de la façade, ce qui est meilleur pour le airflow, et un emplacement de ssd derrière la carte mère) et l'aspect général du boitier me plaît plus (les materiaux semblent plus solides et les finitions mieux faites en général). De plus le Focus G est livré avec deux ventilateur préinstallés en façade, un point de plus pour le airflow qui a en majorité fait la réputaition de ce boitier. Seuls bémoles (très légers d'après moi) : il y a peu de place en back pour le cable management, celui ci pourrait s'avérer retors si votre config est blindé de câbles (j'ai eu un peu de mal à fermer la mienne mais rien de bien méchant) et les vis des panneaux latéraux qui sont un peu étrange et peuvent être un peu galère à aligner lorsqu'on veut les revisser (encore une fois rien d'insurmontable, ca m'a juste pris 10 secondes de plus mais j'ai vu des gens s'en plaindre alors je le précise quand même) Pour résumer : Un très bon boitier full ATX, vendu avec 2 ventilateurs déjà installés plutôt efficaces, un très bon design aussi bien au niveau visuel que ergonomique, et des défauts très mineurs bien loin de tarir l'image de ce boitier à mes yeux. je recommande !

Im Alten Gehäuse wurde nach CPU upgrade die neue CPU Ryzen 7 5800x zu warm ! Einbau war Selbsterklärend mit Englischer Anleitung und Bildern. War OK geht aber bestimmt besser! Nichts wackelt oder wirkt Billig! Auf meinem alten Mainboard gibt es nur einen Gehäuse Lüfter Anschluss, deshalb habe mir jetzt ein Y-Kabel bestellt damit ich beide Lüfter anschließen kann, es war nichts im Packet dabei. LED der Festplatte ist wirklich sehr hell wie einige schon in anderen Rezessionen geschrieben haben, werde ich mit irgendwas überkleben. Die Kabel lassen sich gut verstecken in diesem Gehäuse ,aber es ist schon etwas fummelig aber dafür passt alles rein und nimmt nicht viel Platz unter oder auf dem Tisch ein! Gehäuse wurde wegen den 2x 5,25 Schächten gekauft damit mein DVD Laufwerk wieder einen Platz bekommt! Für mich ist das Gehäuse optimal und ich würde es wieder kaufen. Erstes Bild ist durch die Plexiglas Scheibe! Beim letzten Bild habe ich z.b. die beiden Stecker markiert die mit meinen Händen schon etwas schwieriger zu stecken waren, wenn der CPU Kühler wie bei mir schon montiert ist. Im Moment ist nur der oberste Lüfter aktiv deswegen leuchtet der untere noch nicht! Hoffe meine Rezension kann euch eure Kauf Entscheidung erleichtern.

デザインもかっこいいですし、作りもしっかりしています。ホコリも入りにくい感じで、3ヶ月ぐらい使いましたが、埃まみれということはないです。

Do remember that it appears in reality to be a full size case.

ottimo prodotto,