Cellet Cup Holder Tablet Mount, Car Cradle Holder Compatible for All iPad, Pro, Air, Mini Samsung Galaxy Tablet, Amazon Fire Microsoft Surface

Secure cup mount, fully round, not 3 finger so works with cups with large slots. Deep phone grips, holds my phone secure even with clip on back. Bottom is open so charger cord stay attached. Short so phone does not vibrate from road bumps. Excellent product.

Good product for the price. Expands to fit larger cup holders. Works as intended.

This phone holder does a good job, better than others I have tried (which were rhe type that clipped onto vents). The base has the ability to adjust so that it fits different sized cup holders; the cup holder I need to use it in is an adjustable one and that made it a little looser at its tightest setting than if it had been a solid one sized cup holder, but it still usually stays in securely. I do have to keep an eye on the arm, though, as it sometimes loosens a bit on very bumpy roads, which can cause it to fall over, and when it does the clip that holds the phone falls off. If that clip were more securely attached, it would be easier to readjust things when this happens, and that is really the only improvement I think would be needed to make this a really good phone holder.

I have purchased several models and styles of this type product in an attempt to find ONE suitable product. This is the only one to have survived so far, not to be destroyed either through use or temper. I started with the vent-clip-on models. They all eventually found their way to the landfill. Not all cars have a free cup-holder in such a place as to be appropriate for this particular unit. If at least one cup holder is available in a spot between the seats and is at a relatively low and forward position, this is probably a good choice. Our ML350 has this arrangement. PROs The base expands nicely to accommodate even large cup holders. But one of the best features is the phone clamp itself. I use a phone with an extended battery, meaning the phone is twice as thick as most. This clamp just makes it - which many of the other ones I have tried did not do. Just place the phone in the holder and gently squeeze the sides in, which you can do with one hand after you get used to it. There is plenty of room between the bottom 2 fingers for the power cord. Furthermore, the release mechanism is soft. When the release button is pressed it does not SNAP open like the cheap ones, instead it gently opens in such a way as to give me an expectation this thing might last a while longer. CONs One the CON side - the device is made of plastic and the extension is tall. Although it properly positions the phone for easy viewing, it is tall enough to flex around a bit. This should be expected to a point - it is plastic after all, but I can still follow the GPS screen while in motion. The clamp securely holds the base in place so within the limit of the strength of plastic, you can use the phone in place. Personally I prefer to have the phone up at the vent level for easier viewing on the road, but this is the next best thing as the vent clamp/holders have all been EXTREMELY disappointing. This is a far more secure phone holder IF the inside of your car is arranged to make good use of it.

On extremely hot days down in Florida ( most of the time ) My phone overheats on the window phone holder and starts to slow down/stop working and needs cooling. The answer in my mind, was to buy a holder that sits inside my cup holders on my Dodge Durango and the phone will then be in the shade and easy to see. This cup holder is pretty solid, holds my iPhone XR very well, great visibility and is very easy to fit, so full points for that...but 2 things I don't like, hence the 3 stars. 1. Driving on bumpy roads, the unit does start to slip a little and I've noticed the phone moving left or right within the cup holder, not much, but enough that I have to tighten it and check each trip..not, difficult, very easy to twist the base and tighten, but a little annoying. 2. If you have a double cup holder like I do in the Dodge, the other cup holder is impossible to use due to the section that holds the phone, projects slightly over the other cup holder ( its a bit bulky )...so now I've lost two cup holders, which on long journeys is a real pain. So, in summary, great holder, very solid but has some design flaws. Would I buy it again...No, i'd buy one with a longer arm, so you can still get a bottle in the other cup holder :(

This phone cup holder does a great job holding your phone for a great price. The design and functionality of the device has been very well mapped. The phone holder does a great and has added options to accept almost all cell phones. The sides expand at the push of a button and can be closed to firmly hold your phone. The sides have a hidden feature, which allows them to slide vertically to accommodate taller phones. There are two feet that swing out to hold the bottom of your phone. Now for the base of the mount, this is where all the magic happens. The first noticeable part of the base is how narrow it is, and will not be able to fit any cup holder. Upon further inspection there is an adjustment gear at the base of the neck that will expand/contract the size of the base to fist almost any cup holder. There exterior of the base is made of a firm rubber, but soft enough not scratch or mar the surface of the cup holder. The top of the neck is where phone holder attaches, be sure to firmly join them together (others have stated this as a weak point, where the two pieces will slide apart I have not found this to be true). This upper socket offers 360 degrees rotation to fit just the right angle. The lower portion of the neck has a socket that offers 180 degree rotation. If you are tired of suction mounted phones holders that bounce all around and fall off when to hot/cold. Give this one a try, you might even love it more than me! CONTENTS: Cellet Adjustable Automobile Cup Holder Mount FEATURES: Expandable Base: Firm Grip To Cup Holder Side Grip Arms: Holds Small To Big Phones (4.5in Max) Vertical Socket: Allows For 180 Degree Rotation Horizontal Socket: Allows For 360 Degree Rotation I was supplied a sample for the purpose of review.

Works on my cars to hold an I pad

Works perfectly for what it’s worth but you will lose one cup holder and is kinda low to see while trying to concentrate on the road using navigation.

O produto tem boa construção e bons materiais, mas dependendo do peso do tablet usado, balança bastante no veículo em movimento.

Solid. No shaking or falling. Keeps my dash and vents clear. Wish the part with the clip had 360 moveable neck. Now that I think of it, make all the bends 360 ball swivle things with the side screw to secure it at each point. But for what this is. Solid. Even if you roll your vehicle, this thing is snug in the cup holder and has a bit of force holding it in place.

i like overall design, it is very secure. Only thing don't like is it rattles when you don't have a phone mounted in it

Me gusta mucho que la base se adapte a cualquier medida de portavasos. Excelente la posición y la altura a la que mantiene mi celular cuando manejo para no distraerme demasiado.

وثابت وعملي