Uniflasy 69787 Grill Burner Tubes for Weber Spirit and GS4 Spirit II 300 Series, Spirit E310 E320 S310 S320 E330 S330 304 Stainless Steel Gas Grills, 18 Inch Grill Burner for Weber Spirit Grill Parts

Fantastic and better than the original! I replaced my Weber Q200 single burner in 10 minutes....8 of which was wait time for the WD40 penetrating oil to loosen that single bolt that holds the burner and igniter! HINT: spray the WD 40, clean the grill with a scraper while you wait, spray again, a few sharp taps (not hard)...clean some more...then use your grill lighter stick to warm the bolt slightly and it is easier to remove because the aluminum expands more than the stainless bolt. Mine was the first time I replaced a burner and the grill is from 2013. Let the penetrating oil do the work for you. The burner fits easily and is so much better than the original because it has adequately sized hole and they go right up to the igniter. The igniter never worked on this grill and now I know it wasn't Florida dampness, it was inadequate gas supplied to the spark. This burner solved that and it fired right up (pretty surprising because the igniter is also a 2013 original part). Anyway, it's a gem of a replacement part, great design, perfect fit, invludes an extra bolt if needed and works like a charm. Replacex burner and cleaned grill, 8 minutes and cooked 8 porkchops and 4 chicken thighs- 20 minutes! Easy peasy!

Excellent non OEM part. Easy to install and work perfectly. Pricing is perfect even if the dont last as long as the originals

Well-made parts. Seems like they improved a couple of features over the original parts that came with the grill. Instruction booklet gave easy to follow steps for removal of the old part and then installation of the new. It was about a 30 minute job. Also the flavorizer bars are nice, heavy, well-made. They should last. All in all, I'm extremely happy with this purchase! Highly recommend.

I purchased burners, flavorizer bars and an igniter replacement kit for a Weber Spirit II. All materials used by the supplier appear to be of high quality. The fit and finish of all of the components was outstanding. Everything fit exactly like the grill's original Weber parts. The new igniter system provides a rapid fire series of energetic sparks when the igniter button on the control panel is depressed, resulting in immediate ignition of the propane gas. The manufacturer also provided a well illustrated, clearly written set of instructions that made removal of the old parts and the replacement of the new ones very easy. I am not a craftsman but I was able to remove the old burners and flavorizer bars as well as the complete igniter system and install all of the new parts included with this kit in almost exactly 60 minutes. The 60 minutes includes time spent in cleaning out the interior of the grill and washing the exterior. When I was done, I was very pleased with how fast my "rebuilt" grill reached 450 degrees compared to the comparatively sluggish performance that I was experiencing with the badly worn burners I replaced. Good product fully deserving five stars!!

I bought this kit just for the crossover tube for my Weber Spirit II. The replacement burners will get used later. Instead of slits this knock-off just uses small holes. Cheaper to make and might be easier to keep clean too. The crossover tube is a slightly larger diameter than the original Weber. I easily expanded the insert holes in the Weber end burners using a 29/64" drill bit. Very easy, it works! Good price and quality.

I just tried out these new stainless steel burners on my Weber Spirit 310 Grille. They work great and seem to heat up evenly and faster than the original burners. I highly recommend them, they were a great fit for a 2010 Weber! They are definitely worth the price.

I have a Weber Spirit E210. I have not ever repalced the gas burner tubes before. Well until today. Nothing went boom. And after intallation I let it burn for 20 minutes. They look brand new, and I did it in 30 minutes. Perfect fit, and weight and look was as good as the originals at least. Flame was just right. If you decide to put them in a few thoughts: I went to YouTube and watched basic videos. I put my brand and model number in the search. As you know some videos are better than others. I watched three. TAKE PICTURES with your phone so when it is time to re-assemble you can see exactally what you did. And it's fun to make your spouse look at them to show your expertise. Relax and don't rush. On my grill, I had to take the knobs off front, and the cover off the front. I had pictures if needed to see what I did. Mine was simple, I did not need them. I feel so smug. In the backside of the grill there are two screws to hold the gas pipes in. After years of cooking and grease, and probably because the heat too I could not budge thm with a screwdrver. I used a socket wrence over the screws and it worked great. They provide new screws. (An adjustable wrench of vice grips might work fine.) It is tricky sliding the gas tubes out. I lifted the end screwed up, stuck my tonge out the left side of my mouth, and, wiggled my toes. It's tight, but with a bit of adjustment they came out. It's a tad cumbersome to put the new ones in, but went easy. Be sure to have the tube with the slide to hold the self starter on the right side. Then put screws back in. Reassemble avoid anything that makes a boom

With help from AI and Amazon, I rejuvenated my 23 year old Weber C grill. Living in Colorado, lMy well maintained girll looked good, but the lack of rust, did not mean my igniter and gas jets were teenagers. Like their mature owner, staying in shape often requires new parts. Using AI to assist in trouble shooting a faulty igniter was the first step in getting intimately familiar with this 23 year old. None the less, the grill still didn't light properly. Having done enough research, I was confident that ordering and installing the Uniflasy 7508 Grill Burner Tube parts wuld be the last step in my journey. They fit perfectly and did come with legible instructions and two bolt assemblies. Two notes: before 1. removing old burners on models with retaining screw at the far end corners of the tube assembly. Remove, and save. 2. installing each new supply tube, loosen the screw that locks the air flow mix. Set at half way. Tighten after final flame test.

Good, just like the old stuff only newer

Perfect fit, easy to install and gave new life to my 20 yr old Weber Silver!!

Perfect replacement for smaller webberQ. Came with new screw and fit/burns perfectly.

Einbau ging super leicht, passt perfekt auf unseren Weber Gasgrill und funktioniert einwandfrei 👍

Perfect fit, works great!