Electronics 50-3332-WH-KIT Flat Panel Cable Organizer Kit, Wall Plate Cable Pass Through, Conceals Low Voltage Wires Behind Mounted TV, Home Theater, Cord Hider Management, White

Excellent, inexpensive, and a snap to install

The Data Comm cable pass-thru is my go-to in-wall cable solution for all my TV mounting projects. My Clients have never been unhappy with the choice: it’s clean, attractive, fast and easy to install. And a pair of units - the upper intake and lower exit - are surprisingly inexpensive. Be diligent in your measuring before creating a hole in the drywall. The most common mistake is to cut a hole equal to the dimensions of the entire wall plate, rather than the dimensions of the pass-through opening that goes inside the wall. But once you are clear on that single detail, it is beyond simple to install. In addition to your drywall cutting tool, a pencil and a tape measure, a Phillips Head screwdriver is all you need. Once you position unit in wall, DO NOT OVER TIGHTEN SCREWS. Gently turn the Phillips Head screwdriver clockwise until you feel the plastic clamp arrive in a horizontal position behind your drywall. Add a rotation or two of the screwdriver to tighten, and you’re all set. And remember, the upper unit and lower unit should stay within the same stud bay (between the same two studs). I usually line upper and lower units up vertically with a 2-4ft level, or with my electronic laser level. I use these units for all my jobs and see no reason to try any others!

+1 - Item arrive on time, and not damaged +1 - Item is as described +2 - Includes a cut out template, and is easy to install -1 - Cost Thoughts: I really liked the look of this one over others, but other cable management boxes are half the cost of these. I decided to go with them anyway, and have been happy with them. I've installed 4 sets thus far, and they work well with no defects in any of the sets I have ordered to date. Comes with two boxes, a cutout template, and instructions. If you don't like the look of the "brush" or "star" ones, these work great. Just be prepared to spend a little bit more money than you would for those.

I have run many cables behind walls over the years for flat screens, surround sound, computers, etc. I have used various types of these wall plates in the past, but I will use these from now on now that I've tried them. The quality of the plate is better (thicker plastic) than I expected for the price, and it just doesn't get much easier to install. Other brands require two pieces, a frame and a cover. This unit is all in one and installs in minutes. There is a template in the box for the size of the square that you need to cut in the drywall. Find your hollow channel, trace the template and cut. When you tighten the screws, it opens up two wings that grab the drywall from behind and hold it securely to the wall. No anchors required. You can also install them diagonally or horizontally, depending on your space and direction you are running your cables. They look very professional and can be painted if you need to. This model also has a large opening that will accept multiple cables. I have now installed 8 of them in a recording studio to run cables around the room and they look and work great. Very pleased. Hope this helps.

For my needs, this little guy was perfect. There is a variety of low voltage wall plates out there so it really depends on your needs. But I found this to be excellent. I wanted a wall plate that could go anywhere I cut a hole in my wall for AV cables. And I didn't want to have to rely on a junction box for mounting. The key to this item's design is the small "wings" on both sides allows you to securely fasten this to a hole in any kind of material...drywall, plastic plate, wooden cabinet...without having to use separate screws directly into those materials. With this, you just insert the unit into your hole (a handy template is provided) and start tightening the built-in screws. This will swing up the wings and your plate will fasten in no time. Only caveat is if you are right next to a stud, the wing may not be able to grip drywall on that side. I used this in conjunction with PVC pipes in the wall for running cables from the basement. The fit is perfect. The wall plate sits right above the top of the PVC and it is ridiculously easy to run my cables while maintaining a clean and attractive look.

Cut the hole for the box with a PORTER-CABLE 43218 3/16-Inch Piloted Down Spiral Drywall Cutout Bit – helping a friend hang two TV’s with the Mounting Dream MD2298 Premium TV Wall Mount Bracket. In preparation to carry out the task, I made a wood template for the pattern I wanted to cut out. Then used my DEWALT DWP611PK 1.25 HP Max Torque Variable Speed Compact Router to power the bit. If I had more holes to cut would have purchased a DEWALT DW660 Cut-Out 5 Amp 30,000 RPM Rotary Tool with 1/8-Inch and 1/4-Inch Collets When it came time to get to work, I was able to cut out the pattern in about 15 seconds. It gave me the cleanest cut I have ever had doing this sort of work. As a bonus the hole is square with the wall. The template I made was worth the time it took to make it (photos attached). I put a bottom plate in the fixture to make sure I didn’t mark the wall as I move the router around the fixture. To start the hole, I followed the advice of someone from a different review and tilted the router into the wall at the start this was both easy and controlled the depth of cutting. I just finished installing four of these in some drywall to wall-mount two TV’s. They work great and hold all the cables. tip: hold your vacuum sweeper in the lower left corner of the fixture to pick up dust. (You will need an extra pair of hands, but it is worth it!) If you do a lot of drywall work, perhaps a 24 inch 1” by 2” Straight Edge template with bottom plate of 1/8” plywood (the bottom plate also provides a hole edge guide) is useful. To read about the installation of the TV mount you see in the attached pictures, please click on my name, (in blue), above and read the review of Mounting Dream MD2298 Premium TV Wall Mount Bracket dated May 6, 2017.

Really easy to use and looks great.

Once you have identified the location of wall studs, installation of these cable wall plates was a breeze. Ensure you are not cutting drywall near any electrical outlets or cables. Use the provided template for a perfect fit. I used a box cutter blade in lieu of a drywall saw for a much smoother cutout. Secure the plates to the wall as directed and route your cables..a great professional looking finish to hide all your cables. Great product!!

Perfecto para su uso

Very happy with this unit as I was looking for a horizontal unit for a TV installation. Needed two on behind the TV and one behind the lower console and these really worked well. Easy to install in drywall, still a bit messy doing the cutting, but installed cleanly and easily. Like any installation of this nature, measure and cut carefully on the hole size to ensure a clean and neat fit.

Good