10PCS Premium Alligator Clips Electrical, 5 Colors Test Leads with Testing Probes, Crocodile Jumper Wires Cable with Alligator Clips for Electrical Testing, Circuit Connection, Electronic Experiments

Good alligator clips, large size. I had clips in the past and needed more. Very delighted as those ones are bigger than my previous ones, I assume it is also more resistant if they are bigger. Good quantity for the price (i paid10.97 CAD), recommended.

Never seem to have enough of these if you're a DYI person or you just need to extend a connection briefly. These are pretty decent for the money. The wires at least a foot or more, (more). The alligator clips are a real strong point, depends how you look at it. The springs in these gators are rigid, very rigid. I can't even recall when I've had any alligator clips that have this much tension & thus grip. Obviously these Jumpers are not for use with anything that pulls any real current, so if your planning anything more significant, buy a higher gauge jumper set. I tested all the sets for continuity and they all passed. I only mention that as the wire to clip is only clamped, not soldered, i'll probably hit them with solder per job, if im soldering @ the time. I'm not sure about the plastic boots yet, except they do what they should, stop an accidental short to something close to you're work area. That's good, but the springs are so strong and the boots, so slick, it's difficult to pinch to attach without pulling back the boot, then putting it back. A Small pair of needle nose pliers is advised, but not needed. Once the clips on, it's got plenty of grip, they'll most likely be as difficult to remove as to attach. (Needle nose) pliers or any small pliers work and makes set up & break down, effortless. Definitely recommend these for light jump & testing. They do what there designed to do, and if you do Over Amp them, there cheap enough to discard & replace. Keep the gator clips if you do melt the wires, they'll make great accessories for small soldering project. I'm surprised McGyver didn't have these in his pocket with the Swiss army knife & the duct tape. I'm just say'in...saying.... Blackroadster1

Test cables, great when testing circuits prior to permanently installing. And repair tech should have these in their tool kits. Good quality and so far no problems

So many and so inexpensive! Great for science club and classroom! Functional and delivered on time!

These alligator clips work; they have a strong grip. But as other revieweres have mentioned, the rubber boot is slippery. I tried to flush them with rubbing alcohol, but that made no difference, so there's no silicone/oil on their surface, it's just types of surface materials. However, lightly sanding the alligator clip's outer surface made a big difference: no more slipping! Also, as has been mentioned, the leads are crimped and not soldered, which is not great. However, this is easy to fix if you can hold a soldering iron. So, you get decent quality alligator clips, but need to spend an hour making them usable (sanding + soldering).