Soldering Tip, Conical, 0.5mm x 14.5mm, For Use With C1148B, FX-8801 T18-B - 1 Each

The Hakko T18-B Conical Soldering Tip is a high-quality product that heats up quickly and maintains a consistent temperature. It is durable and precise, making it perfect for intricate soldering projects. I highly recommend this soldering tip for anyone looking for a reliable and efficient tool.

The item I received is a legit Hakko product and a perfect size for through hole use. What more is there to say? Well, let’s see.... If you are eyeing low cost knock-offs and wondering “How much better can Hakko’s product possibly be?”- the answer is a lot. Also it beats buying a new wand... some of the new Hakko stations on Amazon can be had for a little bit more than a replacement wand. 9/10 it’s the tip that goes not the heating element, so you can save yourself a nice chunk of change. The conical tip is a matter of preference. You might also want to explore a wedged tip of similar size and see what you like best. Also a popular misconception: these are not something you buy just to swap in and out for different soldering duties, these are wise to replace on a regular basis. Think of them like tires - it’s “where the rubber meets the road” and is a part expected to wear and need replacing. You will know when to replace when your tip isn’t holding solder well, even after tinning. However, I swap mine out every 6 -12 months as a weekend hobbyist. When you put in a new one it’ll feel like a whole new iron. I also suggest maybe getting yourself some tip tinner, new sponges, some braid, a Soldapullt and some new copper for your wand stand while you’re at it if any of these are looking rough or you don’t have them. The average hobbyist tends to ignore this sort of thing until their station looks like it was thrown out a window into a dumpster, or they try to make due with less than any pro would consider acceptable. Paying some mind to these odds and ends makes the process so much more enjoyable and your work a lot cleaner. Hope that helps.

Works very well for soldering, easy to hold the solder.

This soldering tip is good for general purpose SMT soldering. I was able to solder 0402 sized components and also get heat into connections that had large heat sinks (ground connections on PCB). I had also gotten a T18-S4 tip, but this works much better for most uses. Definitely recommend this genuine Hakko tip over the garbage aftermarket tips.

I took a gamble on this hoping it would fit in my Aoyue 469 soldering iron. Turns out it did, and it seems to be at least as good as the original tip (probably better). So, if you have an Aoyue 469 and need a new tip, this is a good option. That's assuming you can even remove your old tip. Mine was practically welded in place, and I had to use a hammer to get it out.

I couldn’t read the engraving on my existing conical tip from hakko, and thought it said T18-B, but it obviously didn’t, because this is a much broader tip and not really suitable for the kinds of things I work on. I was replacing a hakko tip that is more finely pointed, and on an angle (so it almost looks like the last 1.5mm to the tip is bent maybe 25°). This is a perfect conical tip, and rather broad. At least .5mm in mg estimation.

Does just what it's supposed to. Fits the Ryobi battery powered soldering torches perfectly.

I wish I had discovered Hakko years ago. I could solder SMD components with this tip.

Great soldering tip, long lasting

Panne de fer à souder un peu chère mais qui fonctionne bien et longtemps, je suis un gros utilisateur de mon fer à souder et cette panne dure longtemps pour peu qu'on y fasse attention.

This is the tip which I always wanted to have, it is just superb

Rispetto all'originale che avevo usato per mesi su elettronica fine e riparazioni PCB, questa replica tiene il passo senza problemi: riscalda rapidamente e mantiene una temperatura stabile anche durante sessioni lunghe. La forma conica precisa è perfetta per punti saldature minuscoli, come resistori SMD o pin di microcontrollori, senza dover forzare o rischiare corti. Non si ossida facilmente dopo vari utilizzi e la stagatura con stag è immediata, proprio come l'originale. ​ L'ho provata su vari progetti, da riparazioni smartphone a hobbistica Arduino, e non ho notato cali di performance: trasferisce il calore in modo uniforme e preciso 👍. Un piccolo neo è che richiede una pulizia regolare con spazzola metallica per mantenerla al top, ma è normale per queste punte. In definitiva, se cerchi una punta conica affidabile e versatile per stazioni Hakko, questa è una scelta solida che non delude, soprattutto a questo prezzo.

Original Hakko soldering tip for fine work perfect fit to Hakka soldering iron