Computer Keyboard Stand Laptop Mouse Mount for Workstation Video Gaming, Installed to Chair or Any Round Bar with Maximum 1.96 inch Diagonal Thickness

First off: this thing is AMAZING. However, there are some caveats. Here we go... I'm using this with a Herman Miller Aeron. Your mounting experience could vary based on your chair, but should be generally similar. BIGGEST NEGATIVE: the mousepad. - flimsy, especially compared to how sturdy the keyboard tray is - relatively small - mounting bracket is too small for many armrests. I had to zip-tie it to mine. - not adjustable - mousepad can easily get pulled off, even by just brushing it with your elbow That being said, it still works, and in the end is super comfortable. I usually play with very high sensitivity anyways, so the size wasn't a problem. However, if you like a large mousepad, this won't be ideal. You may need to get used to higher sensitivity. Otherwise, the keyboard tray is SUPER sturdy. Installation is a bit of a pain, and the instructions are super vague, but an hour should have this thing set up. I'm typing this review on the keyboard tray right now. There's obviously some wobble, but it's surprisingly minimal considering this is a floating tray mounted the way it is. Overall, I would ABSOLUTELY recommend this. Surprised I don't see more people with something like this.

My initial expectations were low. Various reviews talked about cheap quality plastic, poor metal casting, and cheap looking metal fasteners. Needless to say, I walked through the installation gingerly fastening things together. I was trying to avoid over torquing any element. Instructions challenged my assumption that I knew English. I'll let you judge for yourself if it's just me (see pictures). I did not watch the youtube video(s). But I would say if I needed good instructions the physical instructions would have been a strain to understand. Thankfully the process was pretty self-explanatory for me. After slowly torquing each joint I was finally able to get the keyboard stand sitting in a comfortable position over my laptop. There is some slight bobbing while I type but it's tolerable. Unless you have really thin thighs you probably won't find much comfort in having the keyboard as low as I have it in the picture. Right now the keyboard arm is somewhat like a seat belt over my lap. That being said if you have a larger lap/larger thighs or are in a reclining chair like the one I'm showing this might not be as ergonomic as you desire. The mouse stand/pad/tray was a bit of a challenge to integrate with this chair ("VUYUYU Massage Video Gaming Recliner Chair"). The primary reason for that is the design of the arm rest does not leave much for you to secure around the arm rest with. The only option I saw was to drill into the armrest. Additionally, due to armrest design and not having the exact length of screw required, I had to saw off the end of 2 of the screws to get it secure correctly. Time will tell if this thing holds up. Since this is only day 1 for me I will have to follow up to provide updates on how the product handles normal use. So far I am pleasantly surprised that it's comfortable and nothing has broken so far (as a number of people have described in their reviews).

very ackward to use and to set up. I kept it for a few months but never got used to it. My mouse kept falling off and the hight was difficult to adjust.

A must-have for comfortable and efficient chair-based computing. This innovative computer keyboard workstation is a game-changer for anyone who spends extended periods at a desk. By attaching securely to your chair's gas cylinder or column, it transforms your seating area into a fully functional workspace or entertainment center. Key Benefits: Optimal Ergonomics: The adjustable mounting system allows you to position your laptop, keyboard, and mouse at the perfect height and angle to prevent back strain and promote good posture. Enhanced Comfort: The mouse pad tray attached to the armrest provides a convenient and comfortable surface for precise mouse movements, reducing wrist fatigue. Versatile Functionality: Whether you're gaming, working, or watching movies, this workstation offers a flexible and customizable solution to suit your needs. Space-Saving Design: By eliminating the need for a separate desk, this workstation frees up valuable space in your home or office. Overall, this computer keyboard workstation is a highly recommended product for anyone seeking a more comfortable and efficient way to work or play from their chair. Its ergonomic design, versatility, and ease of use make it a valuable addition to any home or office setup.

Reviewing MagicHold item model 0K-010W. This is an interesting solution to the problem of having a keyboard and mouse at the fingertips while setting in one's office chair but not at a desk. However, there are some problems. The first issue in functionality is that the keyboard is too high. There are two way to adjust the support arms. The first is to swing the arm from top bend across the user's upper leg. This allows the tray support to center more to the chair, but then that arm touches the user's leg. The second is to swing that same arm parallel with the side of the seat, and then the top bar holds the tray off-center to the chair. This then forces one hand and arm to reach farther for the keyboard. The flaw is that the side support post is too short, and the tray-holder arm is too high. The easy solution would be to first make a side support tube taller. Second would be to make the tray-holding mechanism hold the tray from the front rather than the bottom. The user may wish for a keyboard more at lap height, with even a negative cant away from the user so that the fingers are pointed downward over the keys. Such a position is more ergonomic and relaxing. Another issue is that the clamp around the top of the lower tube is too small. An unscrewed bolt is extremely difficult to reinstall. Also, the knob that holds the nut on the other side of the bolt can split easily and is not really needed. The included wrench can directly hold the nut if it needs it. The arms and attachment to the seat support tube is good and stable enough for the use. The slide-up, spring-loaded palm rest is interesting, but not very useful. The mouse tray is good, but needs taller lips to keep the mouse from sliding off. When having to use the zip ties to hold it on the chair arms (which would likely be necessary on most available chairs), the user can feel the ties under the tray pad, but it is not a deal breaker. The flaw here was that the design failed to have a slot formed over the tray to capture the tie band as it crossed under the pad. I did like that the zip ties had release levers built in should reattachment be necessary. A tip I found is that of putting the long strips of Velcro on the keyboard and the round ones on the tray. Also, where there is a lever locking over a washer mechanism, the black curved part goes towards the lever, and the big flat metal goes away from it. UPDATE: As I use it more, I find that it does not feel solid under my palms and is difficult to position correctly.

Exactly what I needed to work at my three monitor desk. I have two 24" monitors, landscape side by side, and another smaller one that sits off to the side on the desk that I use only occasionally. This setup was killing my neck when I would turn my head to look at one monitor while typing as I often bounce back and forth between both monitors. My chiro suggested I put a sticky note on the top of one of the larger monitors reminding me to 'Turn Your Chair', however, that wouldn't solve the issue of keyboard placement (which used to sit on an undermount keyboard tray). He also suggested I try a different monitor setup, such as stacking them landscape, which I did, but this wasn't working for me either as I would have to look up too far (also straining my neck). I looked into other possible solutions, but when you realize you need the keyboard to pivot along with the turning of the chair, a chair mounted keyboard stand is really the only solution. So, after doing some research, I took a chance and bought this keyboard and mouse tray, despite the up and down reviews. I installed on my desk chair in about 20 minutes total, and it was pretty easy (eliciting my husband to help with the screws didn't hurt either). Since I wanted the tray to move along with my chair rotation, I mounted it to the smaller tube. The height of the chair is where I want it, but if you move your seat up and down a lot, you'll probably have to mount on the larger, outer tube because you lose that functionality when mounting on the smaller tube. It's very sturdy, even when typing...no bouncing at all, and the mouse pad is quite comfortable to use. I have no trouble putting my feet up on the footrest of my chair without hitting the tray, but I could see this potentially being an issue for others. I can also move my chair close to the desk and allow the keyboard tray to fit under it. Very, very pleased with this purchase!! My neck and back are happy again.

I purchased this item some 6 months ago, it seemed to work ok for a while, but for the last couple of months it's usefulness is more and more aggravating in that the tray is not stable, it will freely swing out and then the tray does not stay stationary as I type, it tends to weaken and lowers to the point i have to keep readjusting.

I wanted a keyboard tray for my Ikea desk but I came to the rude realization that my desk has the perfect combination of barriers to make that impossible. This chair-mounted solution was the only alternative I could find. PROS: • I can lean back in my chair with my feet up on my footrest when typing/gaming and keep my beverage/snack on my desk without much of a risk of a spill. • The tray is large enough for a full-size keyboard. • My upper back/shoulders are feeling better. CONS: • The chair takes up more space now and is more of a pain to get in/out of. • The tension/adjustment levers are not fun to get caught on by clothes or skin. • I had to remove the pad on my armrest and wad up an old t-shirt to utilize the mouse platform. • It is what it is, so it’s not going to bear your weight if you decide to lean on it. It’s not designed for that, so just don’t. SUMMARY: I wouldn’t recommend this product for everyone, but if you’re in a situation where you can’t mount a tray to your desk like me, this may be your solution. I’m satisfied.

Wish it was a ball-bearing hinge that could allow me to freely swing the keyboard around; bottom arm that ties to chair is flawed as I had to cut one of my plastic rings around my hydraulic just to give it a bit more give to swing around my chair.

Sure my barber chair is not what the product was meant for, but it does the job. A little cheap material

家族は邪魔だと言われて、１ヶ月しか使えない、取り外しました。 私の椅子にとって、マウスの方がちょっと不適です。