Koala Mount Adhesive

Very simple to use and set up. Works exactly as I need it to holds the tablet firm and still allows the screen to be leveraged with no issue

Great idea! Works as planned, Just had to FIX THE DESIGN of this cheap plastic bracket. Let me show you... ... I felt jumping into this purchase that this product would probably be overpriced based on grade and quality, but I wanted the functionality and I wanted it $15 worth of NOW. This would be a more valuable product if made of cast aluminum and the finish would appear better too, but it's plastic. The cheap plastic injection molding cannot cost more than a penny or so each in large quantities. Having one in hand now, I could see scanning into a 3D printer setup and making my own replacement, at a cost of under a dollar. The cheap chrome painted surface on the original I don't expect to last very long. The finish is very inconsistent, being shiny smooth in some places whilst dull and rough in others. ... The 3M tape is great, I've used it with many packages of inexpensive hooks. It comes OFF easily and works securely against a SMOOTH FINISHED surface. Sadly, my needs were to wall mount it on a wood wall. Even on a painted wall, I would not trust the 3M tape to hold up a $300 tablet, based on my experience with 3M tape. IMHO the tape is great stuff, but only for certain conditions. ... But you can fix this! This is the part where had the engineers had at least half a brain, they'd have put a hole in the mount so that it could be screwed to the wall. Yep. Did it. I took a drill, bored a small hole, applied the tape, and then added a screw to the bracket. YES, I GET IT, the purpose of the 3M tape is to avoid marring the wall and a hole i the wall runs counter to that. BUT the purpose of the mount, is to HOLD UP THE TABLET not "maybe" hold up the tablet. ... There seem to be a lot of vendors selling these in the $14.99 to $19.99 price range. I chose a vendor somewhat at random but my review is about the product not the vendor. The packaging was great and the delivery was speedy. Thank you Amazon and thank you vendor. .. If you like my review, please bump it. Have a comment? Leave it. Have a product you'd like me to try? I'll be diligent and honest.

These worked perfectly to mount a tablet on the wall to use as a smart home control. With the command strips they stay in place and feel secure. The cable holder/clip in the design is nice and handy. Gave 4 stars as I feel they are a little over priced but they were perfect for my needs and worth it.

These are great to mount nearly any size tablet or portable monitor on a wall or furniture. In most cases even after you place the tablet/monitor in this mount you can still access the USB for charging. It is also very easy to remove the tablet/monitor. Be aware that once you place the mount, it is not easy to use it for other size devices.

Great product. I needed something to put an iPad in my kitchen and looked at dozens of ipad holders, stands, arms, and similar solutions. For the price, this is a great product that gets the job done. It doesn't offer any rotation or angle, your iPad is basically stuck to the wall, but it wolds well and it is unbelievably simple. It was great for my needs. Installs easily with the command strips provided, you can get the iPad (or any other tablet) in and out easily, and looks good once set. You can mount the brackets at different distances so you can use it for tablets of different sizes. Note that as always, with the command strips it is important to clean the area well, and in my experience, its better to let the strip adhere properly for a few hours before putting weight on them. If you put the table right after sticking this to the wall it will probably fall down (as it happened to me). But no problem, I just re-stuck the brackets to the wall, let the command strips settle overnight, and I've left my iPad in there ever since (going on about 3 weeks now) and haven't had any issues. Hope this was helpful.

This is one of those ideas that makes you wonder why didn't I think of this? It is so simple and yet effective. The mount works very well and using the included 3M strips holds well to most surfaces. They have a good section on their website describing how to test it (and you get this link with the kit). However the price is way too high for what you are getting. Most 3M strips sell for around $5. This thing is 3 times that. It is really only two little pieces of plastic and 2 3M strips that act as glue. $7.50 would be a much more reasonable price.

I ordered these for an art show were I was going to display some tablets for people to interact with, and they were perfect. I used them for an iPad, Nexus 7, and even a Nintendo DSi (which didn't fit as well as the tablets since it doesn't have a beveled edge, but it still held it in very well). I know they're not advertised for security, but that was my use for them. And just to clarify, I built some rigs for them that made that a possible application, but the only thing holding the tablets were these holders, bonded on wood with epoxy (I put them in opposite corners, so they would stay in place, and couldn't be removed). They worked exactly like I needed them to; they didn't break or warp and looked great. They firmly held the tablets in place, didn't wiggle, or jiggle. While it does look like it could be aluminum, it's actually very nice tough plastic. I saw one review on here about drilling them in place; which I did for this show as well. Small pilot holes and small screws worked perfectly. I only had to do this because one of the brackets that I put onto the mount was handled a lot before applying the epoxy to it, so an a moment of improvising, we drilled it in place. These worked great for a low-cost tablet security device (didn't ware out at all in the two weeks that they were up), but if you're weary of the command strips, I would recommend any other method of securing them in place as the brackets themselves work perfectly.

For some reason when I read the description, I was not exactly sure how this worked. I was really just trying to find a product that would hold my Galaxy tab on a wall. I ordered this because of the reviews, and when it came I was surprised at how small the box was? I was envisioning a one piece unit that slid apart and back together to adjust for width. This unit comes as two small plastic "U" shaped type pieces. It also came with the two adhesive pieces and one alcohol swab. Installation could not be much easier. You clean the wall with the swab. Then you peel the paper from one side of one of the adhesive pieces and attach that to the plastic U. Attach the plastic to the wall. Repeat with the other plastic piece. This allows you to set the width to whatever you need for your tablet. You can probably eyeball the brackets to ensure they are level, but I actually used a small level. I love that you can access all the controls while the tablet is in the bracket, and also can plug in a power cord. I love items that are simple, and do the desired task well. This fits that. It is about as simple as it can be, and holds the tablet perfectly. No regrets.

Mon beau père ayant installé une caméra, il voulait voir l'image de celle-ci d'affichée au mur. Il a donc recyclé sa vieille tablette Samsung Galaxy Tab3 de 7" et il a opté pour ces 2 supports très facile à installer. La tablette tient très bien et ne bouge pas. 2 vis et c'est fixé. Pour retirer la tablette, il suffit de la faire glisser vers le haut. Bref rien à redire, produit très pratique. Si un jour il change de tablette, il suffira juste de décaler une des 2 attaches. (N'hésitez pas à indiquer si ce commentaire a pu vous être utile)

Fungerar perfekt

素材の下地処理が雑でまたバリ線が目立つし、メッキも今時ありえないぐらい安っぽく均質さがない。宣伝写真のように鏡面的で落ち着いたクロームとかを期待してはいけません。100円ショップレベルです。

Épure, simple, bien pensé s'adapte super bien avec mon intérieur…Génial… Tien très bien après 2 mois de collage sur un mur non nettoyé

No sirve el pegamento