Printer Cleaning Kit for Epson, Printhead Cleaning Kit for HP Inkjet 100mL

Very easy to use and very effective! Simplified directions for an effective cleaning: 1. Go into your printer menu and have it start a print nozzle cleaning. Be ready to disconnect the power immediately after it starts. 2. Unplug the power once the nozzle cleaning begins. This is important, it stops the printer head from moving and keeps it in an unlocked position. 3. While the printer head is unlocked and the power is turned off, remove your secondary printer cartridges (if equipped) from the movable printhead. Mark each one to help remember the order they go in! 4. With the secondary cartridges removed, you should see 4 little nipples/ports corresponding to each color cartridge. 5. Grab a few paper towels and fold each one 3 times, lengthwise. Place 1 folded paper towel into the tray beneath the printhead assembly to help absorb the mess that is about to come out from it. 5. Use the cleaning kit with the hose/tube FIRMLY attached to the syringe and fill the syringe with the cleaning solution. 6. FIRMLY attach the other end of the hose/tube from the syringe to the nipple/port on your printer and begin applying pressure to the syringe plunger to eject the cleaning solution into the port. Once the syringe is empty, carefully disconnect the hose/tube from the print nipple/port and dab it clean on a paper towel. Now you can refill the syringe and repeat the procedure on the same port to ensure it is cleaned. 7. After the second flushing, slide the printhead over to remove the paper towel beneath it. (It is going to be a soggy mess.) Take your second paper towel to replace the one you just extracted. 8. Repeat steps 5 and 6 (and 7 if necessary). 9. Once you have cleaned all of the ports, dab up any spillage from the bottom of the printhead before you reinstall the secondary cartridges and remove the paper towel from beneath the print head. 10. Reinstall the secondary printheads making sure they go back in the correct order or your prints will come out discolored and odd looking. 11. Run 2 or 3 print head tests on fresh paper to verify the printer is working correctly. It may take 2 (in my case 3) times for this test to complete properly with freshly cleaned ports because it needs to flush out the residual cleaning solution from the ports. 12. Enjoy your Like New printer!

I bought an used HP 9015 printer that unfortunately was not printing right. I lost hope of fixing it after trying different methods but then I found this product and it worked inmediately after a few flushes.

I had an Officejet Pro 6968 that wouldn't print any form of color at all. This kit has all of the right sizes to adapt to the different nozzles. It cleared it right up and it works like new

Nice cleaning set that was exactly as described. It worked well but did not fix my printer problem.

Works amazing I had a new printer in 30 minutes

Sadly, failed to work with my C88+ Epson printer. I love the printer, one of the few that works with particle based inks which are the only ones that are water resistant. On the other hand, the printer is approaching 12 years old and has been reliable for that time. Epson appears to be phasing out their water resistant inks and it's hard to find a replacement.

The cleaning kit is easy to use and it helped clear ink blockages after the printer was left unused for about a year. Printed perfectly after using the cleaning kit!

This is a quite painful process, but better than throwing out a printer every 2-3 years. Those Epson tank printers are fantastic for economy of ink and mediocre for printing photos.

100% work product super quality

منتج ممتاز جدا (اشكر البائع)

After i didn’t use my printer for couple of days , it wasn’t able to print in colors and black. I tried to fix the problem by deep cleaning option but it didn’t fix the problem at all. I decided to buy this kit and thankfully i did. I followed Youtube videos tutorial and finally the problem is resolved. I highly recommend this kit if you want to revive and clean printer head.

الجودة

Ita scam,i have order th printhead solution kit,i have received a half used bottle thats it nothing else package already opened.