65.6ft RGBIC LED Strip Lights, Work with Alexa and Google Assistant

Be sure to thoroughly clean the surface to which you stick the lights with soap and remove oils and dust beforehand!I got these as a Christmas gift for the family but left them in a box for a year and a half until I finally got around to installing them. Wow, was it cool when I finally got them working. The setup was about as easy or hard as one might expect. I put them up in my back patio area along the ceiling/roof. The 3M sticky strip on the back side is not incredibly sticky, but it seems to have done the job so far. The lights have stuck in place for over a month now through sun and rain. The lights feel delicate. I suggest being extremely gentle with them and be careful not to bend them too much when installing them. All of my lights work great though. No dead LEDs. The lights are so bright that I turned them down to their absolute lowest setting so they wouldn't be too distracting. The lowest brightness setting is definitely acceptable, but I do wish I could make the lights dimmer yet, depending on the mood.I have two of the 30 ft strips, and their lighting effects remain perfectly synchronized, even after many hours of continuous operation. I used the grouping feature in the app, and I put them on a schedule. It's really cool that I was able to make them behave as a single long light strip where the lighting effects are totally seamless between the two strips. You cannot tell where one strip ends and the other begins with how seamless the effects are. The ability to setup lots of different types of entirely custom effects in the app is really cool too. I have 9 different types of smart lights from five different vendors, and these light strips are probably my favorite out all of them.

They worked straight out of the box, they are bright and vibrant iI love them🙌🏾💯

Loved all the abilities to transform my son’s room. Especially love the community designs where other people make scenes that you can play.

I love these lights! I ordered the other version last year of these lights that didn't have the protective coating on them; they were so flimsy and very easily damaged. These however are very sturdy, extremely bright, and have so many more features than the other ones via the Govee app.People mention how they don't stick to the wall well, but I haven't had any problems with that overall.I got the 65 ft set. A downside is supposedly you can't cut them so I just put the extra right below the other. I didn't want to risk messing something up. But I put garland over the lights anyway so it's not noticeable.I've read other reviews on these that talk about the limitations on the segmented sections. I don't care about doing anything super customized so that isn't a problem.The connectivity to my Google Home is totally fine. To be fair, our wifi setup is in the same room that the lights are in.When it comes to installation, I put them along the top of my wall with my husband unreeling them as we went, on the floor below. It's definitely a 2 person job especially if you get the coated strips. They can get quite weighty. I did have to screw in a couple of wall clips (that were provided in the box) to hold up the first bit of strip. I had trouble continuing without doing this first. The strip would just start to come right off from the weight. The box that connects the lights is pretty hefty. You'll definitely have to figure out where to sit it or hide it.Overall though, it's still a huge upgrade from the other version of Govee lights so I'm thrilled! I recommend them for the money!

It’s great and easy to install but I feel like the adhesive could be better. The adhesive on part of it fell off somehow which was really frustrating. It looks really good though and the lights are nice and bright. The lights can be customized via the app or even you Alexa which is really convenient, there’s different modes that include a sunrise simulation, and flashing lights. You can also control it remotely via a phone app.

I installed two of these sets on a section of kitchen cabinets - one on the top for fun lighting effects and on underneath to act primarily as tall lighting or a nightlight. These sets were easy to install and fit the space perfectly (after I measured beforehand). The app is easy to use for control, and I like the physical on-off button for further ease. They paired easily to my home WiFi network, and have been issue-free so far - no flickering or other color issues. They've been stable and the tape has held pretty well so far except on one tricky bend. Awesome kitchen lighting upgrade!

I decided to use these strips for crown lighting and was impressed at the results. I installed them on the furring strip with the attached 3m tape and hot glued the corners. (I didn’t use the ribbon loop for corners as recommended, but rather made the corners wide so as to not stress the strips). Setting them on the furring strip behind the moulding was enough to diffuse the light so you don’t see the individual diodes.I know Govee says you can’t cut these strips, but you can; as long as you’re mindful of what you’re doing and how these lights work. Make sure you use good connectors and reattach cutoffs back to where you cut them off for the sake of continuity for the lights dynamic modes. Do your research first! But this was my first time ever working with led strips and I had no trouble cutting and installing connectors and extensions without affecting the light’s functionality. I recommend the waterproof connectors from the nighthawk store on here. They’re black and clear and good quality. Make sure to get waterproof connectors for these strips; even if you’re not installing in a wet environment. “Waterproof” designates the dimensions of the connectors. These lights have a water resistant coating and the waterproof connectors allow for that extra clearance for the coating while ensuring a tight fit.The technology and customization abilities within their app is where these lights shine above the competition. Having played with these for weeks now, I’ve only begun to scratch the surface of all that they can do. The app interface is very user friendly, but with so many possibilities for customization; I’m still finding new features and capabilities.My only issue with these was installation given that the light strips themselves are hardwired to the system. I wish that you could disconnect the strips like you can the power supply. Allowing more disconnection points in the wiring between power between inverter/switch and switch/strips would make installation easier. Also offering different lengths of cords for the above would allow the customer to be able to customize their installation and put the on/off switch at the most convenient point. It would also help the customer get a cleaner overall finish without having to hide cords, install new outlets, or have the equipment be an eyesore. These are just a recommendation for Govee’s future designs, but I couldn’t justify it as enough to lower my rating of the product.I have Phillips hue bulbs all over my house and was going to install their version of led strips for my project until I saw the price tag. Govee’s version are a fraction of the cost, without sacrificing quality. I’ve never played with the Phillips led strips, but I really can’t imagine what they could offer that would outperform Govee. Very satisfied with this purchase and you will be too.

Premium quality LED, probably the best I’ve ever used. Remote control from your phone, super good app even includes ai to make bring your dream ambiance to life it’ll change color on its own and it’s super smooth! Wayyy brighter than most and almost a perfect fit for my entire room. It comes with a protective coating to make it super durable and long lasting. Only issue I had was it’ll slightly lag on and off for a split second not too often maybe due to the ai but other than that it’s perfect!

Another great addition to my Govee setup. I’m using these 65.6 ft RGBIC strip lights to uplight the ceiling in our outdoor sunroom. I have the lights protected from the weather and installed them inside a diffuser strip, which gives the lighting a really nice finished look.I’ve created scenes in the Govee app, although you can absolutely use these without scenes. Since I have full lighting automation throughout the house, I also connected these to my Govee motion sensor for nighttime lighting.This has worked out even better than I expected. If we go into the sunroom late at night or early in the morning, the motion sensor triggers the lights and gives us just the right amount of light without having to turn anything on.Easy to set up, great lighting, and another Govee product that integrates perfectly with my smart home. I love it!

Se mira de buena calidad espero que duren fácil de configura en appa govee

I like it, it sticks very nicely and clean. You can also operate it using your phone.

Muy fácil de usar, un poco complicado si los quieres poner en un mueble con cuadrados pero no imposible, iluminan MUY bien.

Amazing I really love this item and also you can choose many color in many range you can use more than two for any part of the place and I feel very nice definitely recommended