Spigen PET Proflex Ez Fit Screen Protector Guard For Apple Watch Se (2022/2020) / 6/5 / 4 (44Mm) - 2 Pack

No doubt it is slightly expensive but it’s Spigen and it does it’s job. Just follow the instructions in the video and the installation will be flawless. Easy to apply and no air bubbles, precise fit as they have provided the tray and all necessary tools!!

Bought this thing after getting a scratch on my watch to prevent from any further such cases (Scratch seen in the picture is on the actual watch glass but not on the screen guard). Installation was perfect with no bubbles seen initially. But 2 days later one morning found that the screen guard was missing from the watch and on searching found it on the bed. This means the adhesion of the screen guard is very poor and is prone to fall off (Not sure why its priced so high while it doesn't even hold for the purpose it has been installed for). tried installing the same fallen screen guard and it looks like this now. bubbles keep appearing every time and i need to press them off to the corners. Using this just to justify the money i spent. So, others thinking of buying this just please think again if it is worth for your hard earned money.

This is probably only the second time I’m reviewing a product on Amazon. So that in itself should tell you how happy I am with Spigen. I bought the watch only a week and a half back, and I managed to get a deep scratch on the top of the screen, as you can see in the first picture. As any new Apple product, any sort of damage, no matter how small or insignificant it may seem, hurts! I couldn’t stop looking at that scratch all day and feel bummed out! I immediately regretted not buying a protector sooner. I looked on Amazon and went for Spigen be a I use the same brand for my iPhone 12 Pro Max screen protector and that’s also a fine product. It arrived within 2 days (in Goa, which is quick). The application process was smooth. I got done within 5 minutes. With no bubbles and a perfect alignment - thanks to the application guard it comes with. All-in-all, it was a very good experience! And as you can see in the second picture, the screen protector neatly covered the scratch! Double win!

Bought it for my Apple Watch SE 44mm despite reading a ton of underwhelming reviews. Sometimes you just can’t ignore the brand name can you? Won’t say it’s value for money but definitely serves the purpose. That being said, I struggled a bit while applying the protector and even got a few bubbles but got rid of them eventually. Key: You have to be extremely patient during the entire process! Bubbles will appear but you can easily make them vanish. I’m using it with Spigen’s thin case and both are complimenting each other.

This is the best Spigen product I’ve ever used. I’ve been using their cases for my iPhone 12 for a long time. Now I bought this Apple Watch screen protector. To be honest this is the best screen protector you can get. Totally worth it. I got it right at my first try. No bubbles at all. The size is perfect for my Apple Watch Series 6 44mm. Should be fine for Watch SE 44mm as well. Thank you Spigen. Absolutely love your products. ❤️

First time I have seen Spigen product with an average quality. I have been using apple products since multiple years now and choosing only Spigen accessories for them. So far none of the accessories had any problem, but this time found a product with average quality. While installing, it formed multiple air bubbles. After spending an hour, I could resolve most of the bubbles, but one bubble remained there and this does not seem to be going anyways. I will have to live with it. Hope the one I got is the only defective piece, otherwise Spigen products are always above par.

I’ve used Spigen’s screen protector and cover for my Iphone, loved them both. But this is very disappointing. Here’s why: BUBBLES: I’ve applied it with perfectly described process with lots of cleaning and even after using the bubble squeezer, the bubbles never go and come back again. SCRATCH RESISTANCE: Scratch magnet. Gets tons of scratches very easily. Starts making your watch look cheap. Iphone 11 prox max’s screen guard by Spigen was very good at resisting scratches. I need refund for this product. Extremely disappointed by Spigen. Very expensive and unresponsive product.

This will work on all 44mm Apple Watches. Air bubbles can be removed if you get them in installation. I put tempered on my own and never had an air bubble or dust. The technique is mechanical with the tray given and as it’s curved so air bubble would remain. However I use a simple technique to remove air bubbles (video attached): Just pull the screenguard from side, push air bubble out and place the side back in place. When I installed I had 3 large air bubbles covering at least40% of screen and now there is none. Use dust removers if needed. When I used second one on my watch, I had more persistent air bubbles. After a lot of tries I was able to remove them. Sometimes if air bubbles don’t go away and you have tried my technique few times then try again after few days- give time to the glue to cover the edges back again. Watch looks good and this protects screen edges too. Buying again today even when I don’t have any scratches on existing one- which I have been using for 10 months approx.

Excellent quality as usual.

I’ve held off on reviewing these due to the negative reviews stating bubbles after a few days. Two weeks in and mine is still bubble free and doing a Fantastic job of protecting my screen. You need to be patient applying it, I did have a small bubble in the centre after I initially applied the protector, which I mostly removed with a bit of massaging, it completely disappeared after an hour or so following that.

過去使用してきた中で最高の貼り具合です☆ 2枚入りで１年経ちますがまだ1枚目から貼り替えしてません。コレを貼った上でフルステンレスのケースバンドを使用しておりますが貼っているのが判らないレベルです。品質最高☆機種変しても同ブランドの製品を探そうと思います！

Excelente Producto! Calidad superior, lo coloque en Watch SE 3 44 MM , Con funda Spigen Rugged Armor y va de lujo !!!

Un peu inquiet à la lecture des avis, j'ai fini par décider de tout de même tenter ma chance avec cette protection d'écran. Après tout, ça fait 5 ans que je protège des smartphone avec des coques et protections d'écrans Spigen sans le moindre problème de pose ou de durabilité. La pose : Comme c'est le cas avec tous les produits de la gamme EZ Fit, la pause est parfaitement expliquée en vidéo et s'effectue sans problème. Contrairement à certains avis je n'ai eu aucune bulle à la pose. A chaud : De face - l'expérience est inchangée par rapport à avant la pose : le tactile répond bien, la glisse est agréable et la totalité de l'écran est visible. En revanche je note une tendance à plus prendre les traces de doigts que le verre nu de la Watch. De côté - La protection est effectivement relativement épaisse et souple sur les bords ce qui fait que de près on distingue sans mal la présence d'une protection. De plus cet effet décollé peut amener à craindre un décollage progressif ou un accrochage un peu violent qui pourrait l'arracher (il faudrait cependant vraiment manquer de chance pour le l'accrochage se fasse exactement au niveau du petit interstice entre la protection et le cadre de la montre). Je reprends aussi un commentaire qui dit que lorsque la montre est inclinée, l'épaisseur de la protection fait que les coins sont rognés : c'est vrai. Mais d'une part c'est très léger et de plus on parle d'une montre connecté, on a quand même tendance à l'utiliser 95% du temps en étant bien face à l'écran. C'est selon moi un "faux défaut". Après 48h : Aucune bulle n'est a déplorer, je n'ai pourtant pas ménager la montre : - port d'un sweat donc l'emmanchure resserée qui a buté plus d'une foi sur la montre - exposition à l'humidité pendant une sortie running Affaire à suivre.