Filament ultra silk pla

Got this on a whim and honestly pretty impressed. Spool came wound nice and clean with zero tangles, which is always a relief when you're just trying to get a print going. Ran it at standard PLA temps and it stuck to the bed instantly without any drama. ​The finish is gorgeous—super shiny with that classic silk glow that hides layer lines really well on curves. It printed a lot cleaner than some of the other budget silks I've messed with, and the color pop is awesome in person. Definitely keeping a roll of this on hand for anything that needs to look shiny and cool.

I love 3d printing, and I'm constantly on the lookout for unique and fun filaments. I have had a good experience with all Eryone filaments, and this silver PLA was no exception. It prints well and comes out cleanly. Unfortunately, this is the best picture I have, and my printer, at the time, was not well tuned to use proper settings. Once I tuned it in, there were no additional artifacts, and the material adhered and printed just beautifully. If you are looking to make silver medals or to add some silver accents to a print, this is a great option.

Eryone ultra silk pla red by far some of the best looking silk I have ever tried honestly wish I had it back in December when I was doing Christmas stuff as it would have worked so much better then the stuff I used. Like always it came neatly wrapped and packaged I tossed it in the dryer like I do everything new I open up and to my surprise it was already at a usable 15% rh. I did run this a little hotter then I do other silks but at 210 with 60 bed it printed nice and the finished product is nice and shiny. It stuck to the bed with no problems and tb supports came off clean . This will definitely be my go to for silk from now on and for the price it’s well worth it. If you are looking to make shiny stuff and want to try silk for the first time give this stuff a try I can’t wait to try the others colors.

I’ve run a lot of silk filaments, and the Eryone Ultra Silk PLA definitely stands out. The shine on this stuff is next level—almost mirror-like when your settings are tuned right. Slowing down print speed and reducing cooling made a huge difference, and the results came out incredibly smooth with strong layer consistency. Adhesion was solid, no clogging issues, and it fed clean through multiple machines without any drama. It’s a bit more sensitive than standard PLA (as expected with silk), but once dialed in, it produces some of the best visual results I’ve seen. If you’re looking for that high-gloss, premium finish for display pieces, this filament delivers. Not the fastest material, but definitely worth it for the final look.

I've been using this filament since 2022 because of its high quality and beautiful color, which matched our branding perfectly. Recently, however, I noticed a significant change in both the color and quality, along with a different SKU despite the product having the same Ultra Silk label. I contacted Eryone to ask whether the product had changed or been mislabeled. A representative told me the company must have changed the formula for its Ultra Silk Copper PLA, resulting in a completely different color and extreme stringing during printing. When I raised my concerns, I was told there was nothing they could do. They then stopped responding after I requested to return the more than 40 spools I had ordered. As you can see in my attached photo, the print on the left (Original Filament) is smooth and matches our branding. The print on the right (New Formula) was printed on the exact same printer with the exact same settings. It has a completely different, reddish color, an incredibly sloppy finish, and suffers from extreme stringing and texturing issues. If you need consistent color matching or reliable print quality, look elsewhere. I have already found a superior alternative from another brand and will never buy from Eryone again.

Amazing filament! Could have printed using stock profile but decided to run basic calibrations (Temp Tower, Flow Rate, Pressure Advance) to dial it in. Prints like a dream! Very minimal stringing (just 1 or 2 whisps). No extrusion issues, flows very smoothly. Very neatly wound spool. Right from the box to the printer. No moisture at all. Print settings: .4mm nozzle Temperature - 205c Bed - 55c Vase mode with Line Width of .65 The colors are brilliant (my pics don't do it enough justice). Perfect separation of all 4 colors. Thoroughly impressed with this and can't wait to print some more models!

Very nice good shine when you lower the speeds, printed well out of the package did not need to dry first, nice and crispy right out of the bag I really do appreciate that, stunning beautiful result as close to a true brass that think we can get. Remember to lower your initial layer speed, outer wall speed, and top surface speed all to 30 for the best shine, its beautiful.

ERYONE UltraSilk PLA+ (Silver) I was asked to test ERYONE’s UltraSilk PLA+ in silver, and I ran it through both my Anycubic Kobra 3 and my Elegoo Centauri Carbon. As with any new filament, I started with a temperature tower and found that 220°C on the hot end gave me the best results. From there, I printed a Benchy—and it came out fantastic. Right away, I could tell this was one of the nicest metallic silk filaments I’ve worked with. Next, I moved on to a Dummy 13 (I use these as my filament “swatches”), and it turned out great as well. Details were crisp, and the finish really stood out. For the final test, I printed a larger piece to really show off the surface finish—which is, in my opinion, where this filament shines. The standout feature here is that you can get that smooth, glossy silk look without having to slow your print speeds way down. Most silk filaments need to be printed hot and slow to look good, but this one holds its shine even at more reasonable speeds. Overall, this is an excellent silk filament. Easy to work with, consistent, and capable of producing a great finish without a ton of extra tuning.

😍ERYONE High Speed Filament Silk Tricolor PLA 1.75mm +/- 0.03mm Hermosooo acabado. Brillante, se acoplo perfectamente en cuanto aliba acabando el otro, lo corte en diagonal// y el cabezal lo tomo sin molestia alguna ni interrupción. Bellísimo. Recomendado

PLA qui bouche les tetes d'impression de ma bambulab p1p.... je deconseil le produit

I've been using this filament on my Bambu Lab X1C with great results. One thing to note is that the spool is cardboard, which is great for the environment but can wear down in the AMS over time. To prevent any issues, I simply added some tape around the spool edges to reinforce it—problem solved! Performance-wise, this filament prints FAST. The X1C handles it like a champ at high speeds, and layer adhesion is excellent. It sticks well to the bed with no warping issues, and the final prints come out with a super smooth, shiny finish. The colours are incredibly bright and vibrant, making prints pop! If you're looking for a high-speed, high-quality filament that works great with the Bambu X1C, this is a solid choice. Just reinforce the spool a bit if you're using the AMS, and you're good to go!

Eryone è una garanzia ormai. Ottima qualità del filamento, ottima aderenza al piatto di stampa. Soddisfatto.

Questo filamento è pessimo, oltre al frequente stringamento aveva del filo ruvido circa alla metà della bobina, il filo si è incastrato spezzandosi proprio all'inizio dell'hotend, esperienza piuttosto negativa