Polycrylic Crystal Clear Topcoat

Purchased for an indoor project as a means of reducing the odor associated with the oil based product. This was the first time I used the water based product. The photos illustrate the finished results on an kitchen island project. The wood pictured is cypress stained with Minwax oil based light pecan. The long horizontal boards (first photo) were pre-stained prior to installing to reduce indoor oil. The polycrylic was applied with a disposable natural fiber "chip" brush. A total of 3 coats was applied with light sanding with fine grit sand paper between the first and second coat. The end pieces (photo 2) were finished outside prior to install using the same process. Overall the product use easy to apply and went on bubble free. Overall appearance after final coat was very good despite using a "disposable" natural fiber brush. Clean up, very easy as the brush was easy to clean with just water. I was able to use the same "disposable brush" for the entire project, and the brush still is in good shape (see photo 3), with little to no residue present. Odor was minimal and did not persist for more than 1 to two days. This is a versatile product for indoor projects. Clean up is easy with just soap and water, much safer for indoor use due to less chemicals. I'm quite pleased with the results, and would expect a "furniture grade" finish if applied with a good quality brush or sprayed. My go to for indoor wood and furniture projects.

If you're in the market for a top-quality protective finish for your furniture, then the Minwax 63333 Clear Polycrylic Water-Based Protective Finish Satin is the product for you. This one-quart container of protective finish is perfect for anyone looking to give their wooden furniture a beautiful, glossy finish that will protect it for years to come. One of the standout features of this product is that it is water-based, which means that it is easy to clean up after use. Unlike other finishes that require the use of solvents or other harsh chemicals, this product can be cleaned up with just soap and water. It's also low odor, which makes it an excellent choice for those who are sensitive to strong smells. When it comes to the finish itself, the Minwax 63333 Clear Polycrylic Water-Based Protective Finish Satin provides a beautiful, clear, satin finish that enhances the natural beauty of wood. It's easy to apply, dries quickly, and doesn't yellow over time, which is a common problem with other finishes. Overall, I would highly recommend this product to anyone looking for a high-quality protective finish for their wooden furniture. It's easy to use, provides a beautiful finish, and is long-lasting, making it an excellent value for the price. So, if you're in the market for a protective finish, give the Minwax 63333 Clear Polycrylic Water-Based Protective Finish Satin a try - you won't be disappointed!

First time using this blend. Applied smoothly and dried evenly. Has held up well on kitchen butcher block table in the months since.

I’m an artist who often works with acrylic latex paint (plus lots of other mediums) and after many long years of hard gained experience, I consider this a must have in my painting toolkit. I never used to prime or seal my work and would watch it disappear with time. Oil based sealants are a complete mess, and that’s the beauty of this water based sealant. It’s super easy to clean up, goes on beautifully on virtually any surface and can be applied in a variety of methods. Having multiple sheens is obvious but a super nice touch. I usually stick with satin or matte but high gloss certainly is beautiful and has its applications. In my most recent work, I painted some plates i upcycled, and this product just sealed all my hard work in and will protect it for years to come. Highly recommended!

Great product especially if you do not want to change the color of the natural wood underneath like most any oil based product does. Two coats with a light sanding on the first coat and the finish is very smooth. I purchased satin and it is very nice. Minwax simply makes great products. From their stains to this polycrylic to their tung oil.

This is different than Miniwax polyurethane. This polycrylic is a white liquid that I used on luan plywood walls and I used a short nap roller. The problem with that is rolling it on caused bubbles, which I then had to use a brush to get rid of the bubbles. It wasn't difficult to do. Just one swipe over it remove the bubbles. As much as the coverage on bare wood, it covered as per the label. I put one coat on and waited 2 hours and it dried quickly. I lightly sanded it and than applied another coat. I was happy with the results.

This is an excellent water-based protective finish. It goes on smoothly, dries quickly, and leaves a really nice satin finish that protects the wood without making it look overly glossy. I like that it’s water-based, so cleanup is easy and the smell isn’t overpowering like some oil-based finishes. It levels out nicely and gives projects a professional-looking protective coat. If you're finishing furniture, cabinets, or other wood projects and want a durable clear coat with a nice satin sheen, this is a great choice.

AMAZON IS AMAZING…& SO IS THIS PRODUCT…Super happy with this product. Definitely worth the money. I am extremely excited about using this sealant. My Son uses it for his outdoor garden decorations. I am always so impressed with how well they look and hold up to the harsh sun and weather. This sealant is awesome. Comes in matte, satin and gloss. I use satin on my garden lizards and gloss on all my snakes. The amazing quality. Super coverage. Rally hold up well outdoors on rocks too. I have a desert scene and use this on all my repainted garden critters and reptiles. Protects them from fading. Works very well on garden statues. Most of mine are resin, but I also have a cement life size rattle snake and the colors make him pop. So much that at first my mail carrier would not come close to it. It does look realistic, so I can see why she wasn’t sure about him yet. But she says now she looks forward to seeing him as well as all my reptiles. He even brought his family over to see it. I live in Kentucky and miss the high desert we use to live in. So my rock garden with all the desert critters makes me feel at home. Supper easy to use. Clean up is also extremely easy. Odorless too, so I use it in the house on cold days. It's comparability is amazing as well. Coats on at the perfect thickness. Which means everything to me. Especially my smaller lizards. I do not want them to look caked on. LOVE THIS PRODUCT SO MUCH...

A fairly good finish

So easy to work with. Tough, excellent finish (satin) no mess. Of all the timber treatment’s this is the most successful I have used.

Very good, need to learn the technique of applying because it dries fast and to prevent the foggy appearance

ممتاز وسهل التطبيق

Llegó bien empaquetado y sellado,es para un proyecto así que aún no lo he usado, pero si es lo que pedí.