Premium Synthetic Gun Care

I've tried about a dozen of the big name products and always found a small problem with them ( sometimes large ) . This is simply the best product I've found . It is easy to find a product that works on polymer guns , but on stainless and blued steel firearms this product excels . It cleans , lubricates and preserves well and if used several times according to instructions the guns clean easily , stay lubricated and don't collect grit like other products . My stainless 1911's cycle like they were just lubed even after several hundred rounds of firing and even though stainless has greater demands on lubrication ( affinity for galling ) it just doesn't happen . Lastly this product shows no fingerprints , but imparts a wet look that protects until the next cleaning . Eezox has a pleasant smell that doesn't permeate a room like many caustic gun cleaners do . My wife is sensitive to cleaners and has never complained about this one , even if used at the kitchen bar counter. This is the gun product I was looking for !

This is great stuff, truly impressed. Having said that, you need to use this a certain way for it to do its job. First off, WEAR GLOVES when you use this. It has carcinogenic ingredients, you don't want it soaking in to your skin. Degrease your firearm completely, inside and out. I use acetone on a gun that's never been treated with Eezox. The acetone will completely remove all previous oils, solvents, everything. You want to apply this to completely bare metal. Use a regular bore cleaner on your bore, a dry patch or two, but then put a patch of acetone down it. Acetone dries super fast, but leaves your metal completely bare so be sure to apply the Eezox as soon as the acetone dries. For the first application, put a decent coat of Eezox on and leave it overnight (this amount of time isn't needed for subsequent applications, just the first) Get it on every piece of metal in the gun, inside and out. The next day, wipe off any excess. Now you need to lube the normal areas of the gun for function, locking lugs, barrel links, bolts, slide rails, etc. The rest of the gun won't need oil, the Eezox will keep the rust away (which is it's greatest feature) I used to use the same oil for functional moving parts, and then wipe the entire gun down with the same oil. There's lots of good oils out there for lubing the gun, but many of these aren't great and lasting anti-rust agents. (unless you constantly apply it) From then on, your gun will be better protected (I have had rust even with using CLP and M Pro 7 oil) and it will also be easier to clean. This stuff leaves a dry barrier that is amazingly good at protecting the metal and making it easier to clean. After the first application, you can use the eezox to clean the gun from then on, but you don't have to. Just make sure you completely clean and dry it, and apply a think coat of Eezox after that. Then oil the necessary areas... If you ever shoot corrosive ammo, be sure to use a GOOD copper solvent before you begin to apply Eezox. The corrosive salts can actually get under the copper fouling and rust, but you won't see it until it's too late. I think WipeOut foaming bore cleaner is amazing for this.. I collect curio and relic firearms and some I don't even shoot. I just buy them and store them, so I am very cautious of rust. This stuff has been great. When I know I will never shoot a firearm, that I just bought it to collect it, I actually slather the whole thing with RIG grease. It's like modern cosmoline. For all the guns that are regularly or occasionally used, Eezox has been the best thing I've found after trying tons of products. I had a bad rust scare recently with two pistol bores, and now I'm extremely cautious of my gun care, so I've tried about everything.

Eezox is incredible. Seriously, I only wish I'd discovered it years ago. Works wonders in & on firearms; pistol's, rifles, etc. Works to lubricate & protect knives. Keeps spinning reels running practically perpetually. Eezox is worth its weight in gold, so I tend to only use it on those few 'niche' items - however, I am extremely confident that Eezox has about a thousand different uses, and performs above & beyond w/ each one. Follow directions on container, and you'll see that subsequent cleaning sessions are much easier. Eezox 'dries' to a super thin, very tough protective layer that's heavier than H2O, blocking rust from getting to your firearm's/reel's/knife's metal in the first place. It smells like wheat once it's dry, and even while applying it in its 'wet' state, the fume smell isn't terrible. Get some & I promise you'll stop using everything else. *A small caveat: if your firearm is heavily copper-fouled, or collecting copper at the breach/ejection port, Eezox WILL clean the copper, but it'll require some 'elbow grease'. If you need to de-copper your firearm NOW, it's best to use a copper cutting (possibly ammonia-containing) agent. Bottom line, Eezox will eventually remove heavy copper collection, but it's faster to use the nasty stuff.

This stuff is great. I mostly bought it for my muzzleloader due to the fact that it doesn’t leave a sticky residue. I wanted something that the gunpowder wouldn’t stick to when loading the rifle. I ended up using it on all my guns and have super happy with it.

This really is some of the best rust inhibitor you can find. Yeah, it has toxic substances and it's not good to inhale or get on your skin but that's everything in life. I have yet to find a non toxic product that's better than the toxic equivalent in any product class. The smell isn't offensive, it's just bad for you lol. It's hard to apply because if you can see it you're really applying too much and it doesn't dry, which makes it very tough to apply knowing you're hitting all areas. It's also very expensive. That being said, you get what you pay for and just a few applications a year will protect your item depending on usage/storage. Once is enough if it's just sitting indoors with AC not being used. Set it forget it Ron. 👍🏻⭐⭐⭐⭐