XF OBD2 Gauge Display – Fuel Car Companion, Multi-Function & Overload Protection

I’ll update this as I go along, and try this in several vehicles. Tried this initially in a 2010 Mini Cooper non-turbo model. I’m impressed with the quality of the display, the fluid refresh rate of the data (some monitors can be painfully slow and clunky), and how customizable the display is. As a mechanic, I wanted something so I can readily see coolant temp, voltage, and other data readily, as most instrument clusters nowadays are so dumbed down, you can’t see any of this. I wanted something more modern than a scangauge (nice product, but terrible and outdated display). This fits the bill. If you plug this in, and it does not shut off automatically, there is a wire coming off the included OBD connector that can be wired to a “hot with key on” wire. Overall, very happy. Will update as I go along. Update: can confirm does not work with a 2000 buick Lesabre, which makes sense, due to older obd2 protocol. Will try in a 2004 Mini Cooper soon.

Really impressed and blown away with this gauge. I had gauges in my tuner cars in the early 2000s, non-digital ones. A LOT has changed since then! The install was so easy. Found my OBD-II sensor (located right under my steering wheel) and simply plugged this unit into it. I tucked the wires under the dash and ran the main cable up the side panel (easy snap off side panel in my Toyota hatchback). Used the 2-sided tape provided (it is good quality tape, I have no doubt it’ll hold…and if it doesn’t, I just use some 3M) and that was that! The screen gives you so many options for your display. I picked: Water Temp, Battery Voltage, Average MPG, and Oil Temp (my dash cluster doesn’t give me these readings detailed so that’s why I wanted a gauge, to give me real-time readings. I also liked that I could swap out LED colors of pretty much everything on this unit. I was able to match my interior dash colors and accent my under dash LEDs as a secondary color. Really impressed with this unit. If you are hesitant, don’t be. This was a great addition to my car upgrades!

I got one of these as my cheap car has no boost gauge and even no coolant temp gauge. Just a simple plug into the OBD port and you have a nice information display. It has many different displays- I use the one that has RPM/Boost/Water temp info displayed at the same time. the movement is very smooth and responsive.

This little gizmo is pretty cool, though slightly flawed (more on that later). Functionally, it performs as advertised. I have it installed on a 2008 Saturn Sky Red Line and it gives me the turbo boost gauge that I was looking for, plus a few other data points. It's nice that you can change all of the textual displays to pretty much any data available through the OBD2 port, though the gauge displays have limited choices. I also like that you can change the display colors on things like text, title, and data value. Also cool is that you can create and upload your own custom graphic for display in the center of the gauge. After much trial and error and research, I discovered that the graphics files must be in BMP format, be exactly 87x70 pixels in size, and be in 32-bit format with a transparency layer. Using the free GIMP graphics program was a breeze to get the files exported in the correct format. The display screen itself is very bright. The device does not come with a suction cup mount, which is kind of inconvenient and also strange because I discovered that Lufi does make one that's available on Amazon. The "user's manual" is pretty sparse and obviously not written by someone fluent in English, but luckily, the controls and menus are intuitive. I just might have given this unit 5 stars if it weren't for one big flaw -- plugging into the OBD2 port causes RF interference for the radio. This results in static on some stations that don't have a strong enough signal. I did install some ferrite ring clips on the cable, but they didn't help much, if at all.

Product is awesome and highly customizable. Installed on a 2016 Mustang GT. Buy the shift light with it as it works great as well. Great little add on and takes 10 minutes to install.

Works great on my 2012 JAGUAR XFR.

No support available for PID upgrade to read transmission fluid temperatures no matter what the details say. I have seen two emails requesting a PID upgrade so far with no response. Will be returning the product and requesting a refund. 0-10, would not recommend.

Very nice gauge set up. Wanted something plug n play into my obd2 port and this is it. Keeps track of everything I need. Mounting options are almost endless with the mounting bracket they supply. It is hard to set up at first, YouTube to the rescue. Seller got in touch and told me how to change the rpm redline, which was easy to chnage and was the only issue I have had so far. Great product!

Bought this cuz i prefer a digital read out over analog. My old car doesn't have any temp guage for water or oil temps or even a battery voltage indicator. This was quick to set up(just plug it into the obd2 port and stick it to the dash.) It's pretty customizable as well if you need more info displayed.

جوده عاليه ودقيق والعديد من الخيارات الجميله من قراءات العدادات

Incorrect readings and unreliable information; it should read data directly from the OBD, but shows different readings. Only a few readings are correct. Even the gearbox position is not displayed. The only positive aspect of this device is its appearance.

Totally packed with features. Exactly what I was wanting. You’ll be sitting with it in your car for hours deciding what to monitor.

Not as quality as they indicated it! After 2mos of using it, it went blue screen! Saying need to install something, but i dont know where to get the installer even online you can't find any solution, waste of money!