Duronic Projector Mount PB07XB | Bracket Fixing for Ceiling | 10kg Capacity | Universal | Heavy Duty | Fittings Included | Rotate 360 °, Swivel 180 °, Tilt 180° for Easy Projection Set-up

I used for mounting an optoma uhd300x to the ceiling. this item was far better than I anticipated,especially at this bargain price. I expected to have the fiddly task of assembling a box of parts, how wrong could I be, there are 2 main ready assembled parts. the part you fit to the ceiling is preassembled, I screwed it into a joist. the part for fitting to the projector is complete, you just loosen and swing the 4 arms out, I removed one, only needed three. and then extended two with parts provided. I used the adjustable feet mounts for fitting the cradle rather than the 3 bracket mounting points, they are further apart and I thought it would be more stable. I set the cradle to the projector to give a good balance, then simply hooked the projector up to the ceiling mount. setting the pj to the screen was so easy. one tip I have is to fully undo the 2 tifghtening screws at the hook connection before offering the pj upto it, just makes it a bit easier. I fully recommend this product, compared to the bracket I've been using for 12 years, which cost 3 times as much, is more flimsy. less adjustable and never held its position for long, the duronics is brilliant. it even looks good, with a nice finish. like I say, I used the adjustable feet to mount the bracket to the pj, so you don't even need to get any extra screws/ bolts etc also I don't normally take the time to review a product, so that says something about how impressed I am by this bracket.

This mount is very sturdy and much better than it's cheap price would suggest I would recommend it

instructions are so-so and its a bit fiddly but once its up its pretty solid.

Easy to put up. Does exactly what it needs to.

I managed to get one of these at the bargain price of £29, it's a returned item but it looks as good as new. Even if I had paid full price for it I would still be very happy with it. It is a lot bigger than I thought it would be and it's very well made, and it came with all the items needed to set it up. As long as the wall you are fixing it to is sound this will hold up to 15kg. My projector is a very large 11kg Epson and this mount holds it rock solid. Once you have the projector mounted it's easy to adjust it to the required position. If you are looking for a wall mount then you can't go wrong with this one, it's a bargain.

I bought this having been very disappointed with a flimsy but cheaper alternative. Before purchasing I emailed the manufacturer to check compatibility and they got straight back to me. The mount is seriously heavy duty. The only criticism you could make is on aesthetic grounds - it’s so sturdy and heavy duty and it really looks it - but when you’re hanging a few hundred (or thousand) quids worth of projector over your head that’s no bad thing in my book. The mount went up easily - four heavy duty bolts into a brick wall (10mm drill bit required). Even the bolts are well thought out - screw head to start but capable of being tightened by spanner for the final steps. The plate that attaches to the projector is of similar design to others with articulated rotating arms to fit all sorts of configurations (mine’s a three screw Optoma projector which it fitted fine). The difference between this and the cheaper model is the materials: this one is in sturdy cast metal that holds firm without any give. Adjustment is by two sets of Allen key operated bolts. It’s a bit fiddly to get it just right (though still only a couple of minutes work) but once set it holds well. The design of the mount means you can quite easily take the projector down without removing the fiddlier parts (one bolt and one hook is all it would take). My only gripe about the design is that the minimum distance from the wall is probably more than you need although you can compensate to some extent by adjusting the mounting plate on the projector.

Item arrived next day due to prime and on inspection seemed up to the job, I bought it for the VANKYO Performance V600 projector and originally planned to wall mount but found it restricted connecting firestick which stuck out a fair bit. So decided to mount on ceiling which was easy enough despite just going in to plasterboard with expanding cavity bolts which are holding great, Ended up using a right angled HDMI connector for the firestick to give me more play with mount and it allowed me to get closer to wall and give a bigger screen size. So in finishing I recommend this mount, Cheap, easy to hang and adjust ,decent quality and fitted my projector despite screw holes being offset also loads of different screws come with it that fitted my projector which was handy as ones that came with projector were too short.

The unit is very strong and sturdy. However, assembly instructions are hopeless. It is not immediately apparent how the projector is to be attached to the legs. Also, the unit is supposed to fit to a wall as well as a ceiling. I can't see how the angles will allow a wall fitting. No response from manufacturers when advice requested.

ich hab die Halterung an meiner Schräge montiert, hält super und man kann das Teil quasi in jede Richtung drehen, egal wie man die Halterung befestigt. Für den Preis auf jeden Fall zu empfehlen, hatte vorher so eine Stange die konnte man direkt in die Tonne treten. Mit der jetzigen Halterung kann man nix falsch machen. ich denke auch das sie für sehr viele Beamer passt, weil man die Halterungen, die an den Beamer kommen sehr flexibel einstellen kann, Top.

El soporte se ve de muy buena calidad (100% estandar para cualquier proyector) y es muy facil de instalar

El soporte Duronic PB05XB ha sido una gran compra para mi proyector. Es compatible con casi todos los modelos gracias a su diseño universal, y la articulación permite ajustar el ángulo perfectamente para obtener la mejor proyección. La instalación fue sencilla, con instrucciones claras y todos los accesorios incluidos. Una vez montado, el soporte es muy estable y seguro, sin movimientos ni vibraciones, lo que garantiza una imagen nítida y constante.

Holds the projector perfectly. Stable, good quality and cheap.

Ayant acheté ce pied pour mon vidéoprojecteur et ayant constaté qu'il n'était pas compatible une fois l'article reçu. J'ai entamé une procédure pour pouvoir le renvoyer mais par la suite, je me suis aperçu que je devais payer les frais d'envois donc n'étant pas intéressant, je l'ai garder et se trouve tjs dans sa boîte d'origine. Honteux!