Smart MAG Tool for Glock

I was struggling to replace my G20 magazine floor plate using a handheld punch - while HK magazines cost a fortune, they are a breeze to take down - not so with these Glock magazines! After scraping up my hand one too many times, I decided to order this tool. Following the included instructions, it was a flawless, quick process to remove the factory magazine floor plate, disassemble the mag, and put it back together. I also decided to try replacing my factory floor plate with an oversized stainless steel plate (entirely for cosmetic reasons). It was a bit of a challenge - as you can see in the photo, this aftermarket floor plate is larger than the factory floor plates, so it doesn't "seat" into the tool nicely. It requires a bit more maneuvering with your hands - and some more force. *However*, as you can see in the photo, it works. The tool is still able to install AND REMOVE these floorplates without damaging the magazine, floorplate, or itself - I have my doubts that a cheaper handheld tool would escape unscathed! This tool is clearly able to perform to design specs and beyond. And for only $15, it should be in any Glock mag owners' tool chest.

It took me a couple of minutes to figure it out, but it worked just fine on my Glock 43x to disassemble and assemble the mags. Sure beats a punch. It also disassembles my CZ 75b mags, but not really needed. It was no-go on any other magazines I have. For me this tool works for my 43x and I really like it.

This thing is GREAT! It works like a champ. This is a perfect gift for anyone who is a glock owner.

This tool made it so much easier to disassemble my glock mags. It took considerable force even with this tool; I can’t imagine how frustrating it must be to get them apart without it. The only issue with this tool is that the front punch that lets you unseat the spring detente is too close to the round part with the grey stripe. I wasn’t able to get my Glock 30 10 rd mags onto this pin because the gap was too small. I had to use a metal punch to unseat the spring detente however after that the tool worked great. If you have mags with a big baseplate like the G30’s, you might need to use a pin punch in addition to this tool. This isn’t really a major issue but it does make the tool slightly less convenient and can lead to marring of the spring detente. There’s no real reason why the grey round edge couldn’t be farther from the tool to allow bigger mags to fit on the punch, so I have to take a star off for that design flaw. Otherwise it is a great tool, and reassembling the mag was incredibly easy! Very glad I ordered this tool even though it didn’t work perfectly for my mags.

By far the simplest and easiest Glock magazine tool I've ever owned! Far better than the hammer-looking tools from makers like Otis. No flopping around and slipping, no needing to have your tongue sticking out at just the right angle during the correct phase of the moon. Just follow the simple instructions and Robert is your mother's brother. Worked both 9mm and .45 ACP magazines.

This tools works great for it's purpose. It's way better than most alternatives out there. I've snapped a couple of the tools I've purchased on Amazon for removing the bottom of my Glock magazines. Man, they're a pain. Not only do you have to slide them, but there are two notches on each side of the magazine that are truly locked in. If you don't stick a flathead screwdriver in between the base and the side of the magazine, Then you're bending your magazine to get it apart. With this tool, all of that comes to an end. The unloader is cool, too, although I don't really use that as much. Great tool!

Some things they don't tell you that they really should, if they want to sell more of these. First, this is a VERY well-engineered tool. There are two materials used -- a stiff but gripping frame molded as a single piece around a core of extremely high-strength plastic, which feels reinforced. The gripping part makes the tool entirely non-skid on the surface you are using, and the super-strength part is what interfaces with the magazine proper. Second, it actually works exactly the way they claim, and it really is that easy. And it seems like they spent a lot of time sweating the minor details, like the angle at which you begin levering the magazine and how that prevents you from slamming it into the work surface, and the tolerances which are the perfect balance of precision and clearance for easy use. Third, this thing is built like a tank. Turn yours upside-down and you'll see how they've reinforced the inner super-strength part in such a way that it creates the perfectly-shaped magazine unloader. Frankly, this thing is worth twice what they charge. The people involved in bringing this to market are true mensches to the firearms industry, and I look forward to seeing more of their inventions. BOTTOM LINE: If you own a Glock, buy this. UPDATE: So I bought a Mantis X system for practicing indoors, using the Glock magazine floorplate replacement adapter. I removed the stock floorplate using this tool and then manually pushed on the adapter floorplate... and then saw how the adapter floorplate's detent hole was now recessed deeply under the short Picatinny rail on the floorplate. Oh, No! So I became frantic about how this tool wasn't going to help with removing THIS floorplate... until I tried it. You won't believe this, but they actually formed the super-strong insert to exactly fit the recess in the Mantis X adapter! Of course, because the adapter floorplate is way thicker than an original floorplate, the mag drops down onto the tool an eighth of an inch once you slide it off the floorplate adapter, and you'll have to manually push the adapter onto the magazine rather than use the tool, but that's a piece of cake and the main reason I bought this tool was to remove Glock floorplates.

videos always work great but in real life they suck. buy the old style wrench it works better

Si tienes una Glock y alguna vez has intentado quitar la placa base del cargador, sabes lo difícil que puede ser. Esta herramienta de Real Avid hace que el proceso sea rápido, seguro y sin esfuerzo. 🔹 Fácil de usar: Con solo una leve presión, la base del cargador se desliza sin problemas, evitando daños en las pestañas de retención. 🔹 Construcción robusta: Materiales de alta calidad, con un agarre ergonómico en gris y rojo que facilita su manipulación. 🔹 Ideal para mantenimiento: Perfecta para limpiar, reemplazar o instalar nuevas placas base sin riesgos de lesiones en las manos. Definitivamente, un accesorio esencial para cualquier propietario de Glock que quiera simplificar el mantenimiento de sus cargadores. ¡100% recomendado! 💯🔥

Einfach gut in der Handhabung, Glock Magazine lassen sich leicht öffnen und nach der Reinigung damit wieder verschliessen.

Très pratique !

Muy bien

Das Real Avid Magplatten-Werkzeug ist ein absolutes Must-have für jeden Waffenbesitzer, der seine Glock-Magazine sicher und effektiv warten möchte. Es macht das Wechseln, Montieren und Reinigen der Magazin-Grundplatten kinderleicht. Die Handhabung ist äußerst praktisch, und dank des robusten Materials fühlt es sich sehr stabil an. Besonders gefällt mir, wie präzise das Werkzeug arbeitet, ohne dass man sich Sorgen über Beschädigungen oder Kratzer machen muss. Es sorgt für eine schnelle und sichere Montage, und der gesamte Prozess ist dank dieses Werkzeugs viel weniger umständlich. Ich kann es jedem empfehlen, der eine zuverlässige Lösung für die Pflege seiner Glock-Magazine sucht!