PA-14 Professional Precision Wire Stripper for Micro-Thin Wires. Made in Japan. Solid Wire (AWG 32-20), Stranded Wire (AWG 34-22). Sharp & Perfect Round Finishing Edge

These are very nice. A bit pricey for what you actually get, but if you do a lot of work with wire, they're worth it. I stripped a little bit off a piece of 30AWG wire, then stripped a bit more. I looked at the wire where it made the cut for the first strip under (very) high magnification and didn't see any nicks in the wire at all. So these are really good wire strippers. Some others I had (much older) would nick the wire some times, and once that happens, it will break sooner or later. So I trust these strippers. In other words, "I like 'em!"

Great quality and very sharp. Thank you!

I was looking for a precision wire stripper for my electronics bench and this product did not disappoint. I was impressed with the quality of construction of the tool and ergonomic feel of the handle. This tool is precision made and strips small gauge solid wire for prototyping, wire-wrapping or breadboard purposes. The jaws of the stripper come together with a precision feel, and it has a lock for when the tool is stored. It accurately strips insulation of 22, 24 and 34 gauge wires without nicking the wire (those are the most common wire gauges I use on my bench). Would order again if needed a replacement.

I love this tool. I work a lot with AWG28-30, and this wire stripper is sharp, precise and has a good overlap between the settings. So you can always select the most appropriate and best working one for every wire and insulator. Its a good and very welcome addition to my toolset. It took me a long way to arrive at an appropriate replacement for my worn out old tool. I have no doubt the new wire stripper will last a long time, as its well made, the steel its made of seems to be right and the feel is good. Don't look any further, get this one and you won't regret. Enjoy!

Beautiful quality. First time stripping 24 AWG wire, silky smooth and no wire threads cut. Just on another level compared to my other wire strippers. I wish all my hand tools were this nice. Definitely worth paying a little more for.

I purchased these strippers with a specific purpose in mind, rewireing audio tonearm. These use 32-34 awg wire to bring the signal from the cartridge to the phono preamplifier. The wire must be small enough to not inhibit the tonearm and cartridge from tracking the record as intended. I use generally milspec 34 awg wire, as the specs are generally higher than many arms are equiped with. The number of strands in this small guage wire I use vary from 7-17 to make up the 34awg wire guage. It's extremely mportant to leave all strands fully intact to achieve the desired results. Though I haven't wired a tonearm yet using these, I have stripped a couple different wires that I have and they cleanly removed the insulation with any damage that I can see. All othe strippers I have purchased,Klien , blue point and others are not built with the precision of these strippers. I'm thrilled and have, of and on tried to find this quality and price for the last 20 years. Well worth the asking price and I am daunted by working with small guage anymore. Thank you for making these available, maybe I clean off the work bench a get to work today!

I love the 'squared with curves' grippy grips that are on the PA-14's. The fit and finish of this pliers shows quality throughout. Very accurate wire stripping throughout the entire 'small' range (22 awg to 34 awg) of these precision specialty pliers. The design of the pliers and the green grippy grips (my own words) just can't be beat.

Best wire stripper I have used, period. Expensive and worth it.

These are really precise and let you make super fine connections. This is really useful for working on micro computer gear etc. I'm very happy I chose these ones.

This is ideal, for working with pre wired micro SMD LEDs. WOW. It’s gauged only for 22 gauge to 34 gauge wire stripping, and that’s exactly why I got it. The pair seems a bit big in the photo, and I’m not sure why as there isn’t anything in the pic to compare it to. It’s not large at all. It’s about the size of a smaller needle nose pliers. 17.5 cm or 7 inch. It’s just right. Not big and heavy, but - trust me - really engineered well. The wire that I needed this for is so fine even trying to melt the insulation off the wire actually burns the wire right off! When I first used it I thought I had put the wire in the size slightly too big for it and assumed the wire just slipped through. NOPE! It’s just that darn sharp and its jaw shape is just that well designed. No resistance. No cut into my super fine wire. Just the perfect tool for this. And yes! this stripper is so fine and delicate when it works thru a wire end, you feel no resistance! I know the insulation is lighter with this size wire but it’s just a fluid experience. And I know you don’t need an aesthetic experience when you strip wire. What I’m saying is this is really engineered with excellence. It works without tugging or clamping into a wire with a stupid - hard grip. This stripper is so great. I now call it my best wiring tool. Wow. I feel dumb I didn’t buy it sooner. You get your moneys worth, here.

Les commentaires étaient élogieux et je confirme qu’ils les méritent amplement. Très bon outil 🤩

I needed them to strip 34 swg wire and these made an easy job of it which shows just how well and accurately they are made

このワイヤーストリッパーには大満足です。とても精密で、必要なサイズがすべて揃っているので、どんなワイヤーにも対応できます。使いやすく、作業がスムーズに進むので、作業効率もアップしました。期待を超える品質で、本当に感謝しています。ワイヤー加工に欠かせないツールをお探しの方に、心からおすすめしたい製品です！