Wixey Digital Angle Gauge

My husband purchased the Wixey Digital Angle Gauge Type 2 with Magnetic Base and Backlight, and it has quickly become an essential tool in his woodworking arsenal. This device offers a combination of precision, convenience, and user-friendly features that elevate its utility. 1. Accuracy: The Wixey Digital Angle Gauge provides incredibly accurate angle measurements. Whether my husband is working on miter cuts, bevels, or setting up the table saw, he can trust the readings to be spot-on. 2. Magnetic Base: The built-in magnetic base is a game-changer. It securely attaches to the metal surfaces of our tools, allowing for hands-free operation. This is especially handy when setting up saw blades or jointer fences. 3. Backlight: The backlight feature is a real standout. It ensures readability in various lighting conditions, even in dimly lit workshops. No need to squint or use external lighting sources. 4. User-Friendly: The digital display is easy to read, and the controls are straightforward. Calibration is a breeze, and the auto-shutoff function preserves battery life. 5. Versatility: This angle gauge can be used in a variety of applications, from setting angles on power tools to checking the squareness of assemblies. It's a versatile tool that suits both professional woodworkers and hobbyists. 6. Build Quality: The Wixey Type 2 is built to last, and it feels durable in hand. It can withstand the demands of a busy workshop. In summary, the Wixey Digital Angle Gauge Type 2 with Magnetic Base and Backlight is a must-have for anyone who values precision and efficiency in woodworking or metalworking tasks. Its magnetic base, backlight, and overall ease of use make it an indispensable addition to any toolbox. We highly recommend it for its quality and performance.

Good product, shipped quickly. The small size works very well for truing up table saw blades to the table. The magnetized base hangs onto the blade. Just zero out the gauge on the table, then hang the gauge on the blade, and dial in exactly the angle you want to cut. Can be any angle, not just 90 or 45 degrees, so if you want to make a pentagon, or hexagon, or octagon (or whatever) sided box, you're covered. The readout is clear, and reads in decimal degrees. I think the accuracy is +/-0.2 degrees, which is fine for woodworking, and better than trying to use a protractor or square. I always find the square approach problematic, since on most saw blades the carbide teeth are wider than the steel part of the blade. This gauge avoids fouling the carbide teeth of the blade, so you get an accurate blade angle reading. Cool tool!

Got this to check angle on saw blades. I thought it would be more magnetic than it is. Doesn’t hang on to blades so have to hold it (yeah blades could be weakly magnetized but whatever the reason). Easy to use and seems to be accurate. Zero it to one surface and measure the surface of interest. Very simple and a lot easier than using carpenter square (and this can be used for any angle, not just 90 and 45). A nice way to confirm what you think you’ve done. Good purchase if angle precision is important

This is very accurate and easy to use. My only issue with it is if you leave a battery in for longer than 6hrs it will totally drain the battery. Kind of annoying but just make sure you remove the battery immediately after use.

Easy to use and screen is easy to read. good quality item.

I bought this product, because I have a really old table saw and it just has hash marks on the side to tell you your angle. There was no way I was trusting those hash marks. It turns our I was right not to, after using this device. The table was close, but I would have cut incorrect angles if I used those marks to set my angle. This device worked well, though. I cranked my blade out to get enough surface area without resting the edge on the teeth. That would have given an incorrect angle. Like I said, my table saw is old and wobbly, but that wasn't a big deal. I just let it find it's own low spot and zeroed the table to there. Then I put the device on the blade. They recommend setting the blade to 90deg off of the table saw, then putting it on the blade and zeroing it out again. I didn't do that. I just subtracted my 15deg bevel from 90deg. The reason is because my table saw wobbles when I'm adjusting it. By leaving it zeroed to the table, I could put the device on the blade, adjust it, then let it find it's center of balance, check that the table was still at zero(taring it if not) then returning it to the blade to make sure it was still 75deg, which is what I was shooting for. All of that sounds complicated, but it's not. This simple device allowed me to make my desired cut with rickety equipment, which is about all I have. Anyone who's cut with such tools knows what I'm talking about. It allowed me to easily make a cut that would have been almost impossible otherwise. This product is ideal for table saws and compound miter saws, but to be honest, I think you could even use it for a circular saw or jigsaw if you used the method above. The important thing is that during your final check, when you zero the base, you don't shift it when moving it from the base to the blade. This product is well worth the money, though.

Seems way better than my last other brand one was. Checking against an accurate square it’s bang on. Glad I bought it.

Seems to work very well, checked it against my certified machinists square and it is in agreement. I have no difficulty reading the display when using it in my shop. Magnet is of sufficient strength to hold the unit in place. I’m using it to set angles on my woodworking equipment (tablesaw, bandsaw, mitersaw, and jointer) Note that there is only a magnet on the bottom, some tilt boxes have magnets in both sides as well, but it doesn’t impede use.

Good product

I use it for setting the angle on my table saw

This solidly built device, with its magnetic base, sticks firmly to my 8" Skywatcher dobsonian telescope. Easy to use, and with a setting circle helps find dark sky objects easily. Because the screen is bright I added some red cellophane for night time use for star gazing. I use the Skyview app on my phone to get the azimuth and altitude settings.