MAG VAMPIRIC 010

This is a fantastic case. Plenty of internal space for a budget PC build. I replaced the fans while building my PC so I can't speak on their quality but the case is fantastic. Light strip at the front gives a nice balance between wanting some RGB and it not being OTT.

So far I'm finding it a great case. Installed an msi 450 board and and 5700 cpu with no issues plenty of room for a 1050 ti graphic card and a 240 water cooling system. Most cables are neatly tucked away out of sight. I had resisted cases with window sides and led lighting for many years until I've had almost no choice when my old case had rusted out due to a damp home. I'm hoping that with a recent move that issue is solved and this new case seems well built with plenty of internal space. Only extra I would've likes is rolled edges for cable outlets as they come through but careful routing and it shouldn't be a problem. Good looking case at a decent price and quality

Bought this for an upgrade to my son's PC. In general I'm pretty happy with the case, the styling is OK, the front RGB strip looks good and doesn't need a separate controller, cable management is decent and it is reasonable value for money. Tempered glass rather than acrylic is a nice touch and there is room for a reasonable number of drives (2x 2.5" and 2x 3.5"). However it is not perfect - perhaps for £50 one would not expect PC case nirvana - so here's why only 4 stars. First of all it feels a bit flimsy, the steel panels are quite thin and it does not feel terribly robust, the edges can be a bit sharp as well, but not the worst case I have worked in. There's no front dust filter, there is a magnetic filter for the top of the case but, frankly, you are not going to be drawing air IN at the top of the case so that's of limited use keeping the inside clean, also front intake air flow is a bit restricted - the case will take 3x 120 or 3x 140mm fans at the front but the air is pulled in through relatively small vents along the sides of the front panel and the top and bottom fans are at least partially restricted. The PSU dust filter feels especially cheap. It has "pop out" covers for the PCI slots, these are just aching to damage your motherboard when you remove them and, of course, not replaceable should you want to reconfigure any add-in PCI cards. It has a weird hinged flap partially holding PCI cards in place, but not quite so you still need screws. Almost as if it was designed as a quick release mechanism but MSI then decided it didn't really work but could not be bothered to change the tooling to get rid. If you leave the hard drive caddy in place (it is removable) routing cable bundles from the PSU becomes quite hard due to restricted space and the usefulness of the quick release trays for the hard drives distinctly mitigated by the fact that the thick cable for the main 24-pin power connector is going to be wedged in making it difficult to remove or insert a HDD. If you opt to leave the caddy out of the case because you don't need to mount any 3.5" drives then there is a nice large hole in the PSU shroud through which you are going to be able to see an untidy mess of cables. Finally the supplied RGB fan does not move much air and needs a motherboard which can drive 5v ARGB (or suitable controller but these seem few and far between), in the end I tossed it and put a regular fan in its place. Overall - there's nothing *seriously* wrong with it, but it's still a 50 quid case and that does show in some places.

What a lovely case this was to work with. Well laid out, good quality build and such a great looking final result. My old PC was feeling the strain a little, so I decided to upgrade. I went with this case as my recently purchased graphics card and monitor were both MSI products and, I liked the quality of them both. I wanted a case that looked good and this one (the Vampiric 010) looks even better in real life. I purchased three more ARGB fans, which were a doddle to fit and now everything is up an running I'm honestly impressed with everything. The internals look clean and tidy, with plenty of airflow to keep things cool. Completely happy with my purchase!

Overall a great case, plenty of space but remains compact, very clean aesthetic (essential for the sitting room). Very happy. For my set up (moderate gaming, moderate overclocking) is pretty much perfect. Two small caveats however. 1) not including a dust filter in the front intake is insanity, granted they are only pennies online but that's no excuse. 2) whoever designed the system to remove the front panel should be shot. When the case is disassembled it's easy enough, just ping 8 little legs, takes less than 10 seconds, but you have to disassemble the case to do it! (both sides). How much would a hinge and latch system have cost? My guess is pennies. Maybe they knew you would have to disassemble it regularly because there is no dust filter!

The MSI vampiric 010 is a very sleek and modern pc case that support ATX boards, as well as M-ATX and Mini-ITX motherboards, The RGB on the font panel and rear exhaust fan are bright and vibrant and the fan is compatible with mystic light sync which is MSI's light sync software. the build quality on the pc case is out standing with no visible machining marks as well as no rough or sharp edges. this pc case is a very good budget choice with the looks and build quality of a high end case.

I read all the other reviews for this case and thought i would give it a try as i needed to tidy up my internals and get my usb's at the front working again. The cons first for £50. 1) There is no sd card slot 2) the rear fan does not light up unless you have ARGB ( i knew this already) 3) minimal instructions. The normal for £50. 1) minimal design which works. 2) nice space to hide cables near the power supply 3) takes 2 SSD's perfectly and 2 hdd's in hidden areas. 4) All round good design but stock fan quiet but not whisper quiet. The pro's for £50. 1) tempered glass adds weight and looks amazing 2) nice lot of screws and cable ties. (you'll need your own fan screws) 3) front rgb lights work lovely without ARGB, works with a button on the case to change colours etc. (nice touch) 4) LOADS of room to work with. 5) Looks fantastic and great cooling (temps at idle 25-30 degrees with 2 front fans, 2 on the top and the stock exhaust fan.) This is NOT a £100 plus case so you get what you pay for and then some.

This is a really good case and I love the the design and the front RGB lighting. It was my first time buiding a pc and I found the installation fairly straight forward. There are few areas which they could have improved like give us more case fan than just an exghust fan and improve the expansion slot cover which is very loose and it can come off easily if you are not careful. I would also like the mention that I could not install my 240mm radiator at the top because the space is simply too small with ATX mother board so I had to install them at the front. Lastly MSI spec stated that exhaust fan can be replaced with 140mm instead of 120mm but that's clearly incorrect because there is simply not enough space and the bracket only support 120mm. Overall it's a good design and I would recommend it if you are looking for stylish low profile design. 👍🏾

La caja y el acabado es excelente. Se echan de menos algun ventilador delantero, pero yo en mi caso no le he puesto y el equipo con su i5 10400 y su rtx2060 es la mar de fresquito, supongo que si quieres combinaciones mas calurosas estaria bien meterle alguno más. Trae un Ventilador argb y tiene unos leds delanteros que se controlan con un boton arriba. Es super espaciosa y te cabe una placa ATX perfectamente, además de que tiene multiples escapatorias para los cables y que te quede un setup muy chulo y limpio.

It has everything you might need Has one argb fan included Plus also has a fan hub so in case your motherboard doesn't have rgb header you can utilize it ,front rgb strip and argb syncs you can also add more argb fans and really sync all light without a argb motherboard . Nice thick tempered glass , look and finish of the cabinet is really good Magnetic dust filter on top You can mount 240mm rad on top and 360 at the front 120 mm 5 fans or 4 140mm fans Has a lot of options so it's very flexible HDD caddy's for very easy installation Has all the premium features you might want so definitely go for it

El gabinete es de muy buena calidad y está espacioso, viene con un ventilador ARGB de tres pines, lastima que mi motherboard no tenía está conexión, cuenta con una muy buena gestión de cables. Recomendado por si quieres un buen gabinete que no se vea tan genérico

Questo è un Case di cui le persone parlano molto, e molte persone lo consigliano. Ho voluto provarlo in prima persona per capire se avesse davvero tutto queste potenzialità, ed avevano ragione. Un Case fatto con dei materiali stupendi, molto resistenti, il vetro temperato è un tocco di classe anche se presente in molti altri case della stessa fascia di prezzo, ma perché comprare proprio questo? Beh, cominciamo parlando dello spazio: c'è tutto lo spazio che si vorrebbe per una scheda madre atx, con un sacco di buchi per far passare i fili in modo intelligente e per non farli vedere ovviamente, c'è poi un sacco di spazio per le ventole, se ne possono mettere 3 anteriori, 2 sopra (anche da 140mm) e 1 posteriore, fornita già preinstallata, argb. Vi sono 2 "cassettini" per SSD e HDD e le porte I/O nella parte superiore sono comodissime. Il case è costruito per avere un flusso d'aria ottimizzato, con varie sessioni di gaming pesante, per più ore consecutive, non ha mai scaldato (ho montato delle ventole Noctua molto economiche in aggiunta all'ARGB posteriore in dotazione, che è ottima). I Produttori stessi consigliano di mettere le 3 anteriori in entrata ed il resto in uscita, ma io vi consiglio di trovare il vostro setup, provarne vari ed essere creativi! Per quanto riguarda il lato estetico, beh, è meraviglioso, davvero. Il led frontale è qualcosa di eccezionale ( i colori si muovono , non sono statici), la ventola preinstallata è incredibile (sono ripetitivo, si) e lo spazio nel case offre varie possibilità di personalizzazione con strisce led. Insomma, sono rimasto contentissimo, il prezzo lo vale tutto. Chiunque voglia farsi un bel Pc da gaming, non pensatici sopra, compratelo e basta!

Für den Preis ein unschlagbares Angebot. Design und Material wirken hochwertig bietet genügend Raum für die Kabelführung. Auch der Einbau der Hardware erfolgte ohne Probleme. Die LED-Leiste an der Front kann separat in verschiedenen Modi angeleuchtet werden. Bezüglich der Wärmeleistung kann jedoch im Urzustand keine Aussage getroffen werden, da direkt 5 Kühler einer anderen Firma eingebaut worden sind.