Large Pegboard Kit – 4 Black 24"x16" Panels for Wall and Tool Organization

Just right for my office. These things are nicely made with plenty of offset from the wall so you can easily add all the hooks/racks/shelves you want. Opinions vary on how to mount them, but I am happy with threaded self-tapping drywall anchors. Note that this means you would need to find the studs in your wall and NOT drill into them. If your studs are spaced at 16-inch intervals (not all are, not matter what Dad told you as a kid about those marks on your measuring tape), once you've found the first one, you're in good shape since these panels are 16 inches wide. I used six mounting holes, leaving the two at the center of the short edges unused. That's enough dry anchor to old over 100 pounds, which I doubt you're going to hang on one of these panels. For ordinary bench tools, this is going to be fine. The black plastic looks great for hiding the scuffs and other blemishes that pegboard accumulate. Mounting was easy. Use a level and the internal stick from a ballpoint pen to mark the holes. Drive your anchors in until flush to the all. Start all six (or eight, if you're a maniac about this sort of thing, like my dad was) screws but DON'T tighten them down until all six are half-way in. This lets you jiggle the panel a wee bit to cope with the fact that your anchors probably didn't go in precisely where you marked the wall. After the first panel, just make each one is flush along the top end (your level helps with this again, but ignore the bubble now, because making tall four parallel is more important than any minute levelling error you made in the first one). I got a rock-solid attachment to the wall from this approach, with no gaps. Absolutely rigid, lined up, and flat. Remember to vacuum up the drywall dust sinking your anchors left on the floor. This are a good deal. I recommend them.

For me personally it works. I've seen reviews about people complaining how it breaks when you put it up on the wall and to those people I say you must not know how to use your tools. If you ask me anything more than 4inch pounds on your drill is way too much for these panels, the screws aren't going to fall out if you don't tighten them until you can't get your drill to fasten them anymore, if you do that stuff with screws you're an idiot, this isn't a crank bolt you're putting on. As for quality my only complaint is the edges, they could do without the boarder on them so you can get the panels to fit 100% flush together but it's fine the way it is still. As for durability, my wall has about 150 pounds of tools and cleaning supplies between the 11 panels I have up so there is no shortage of strength here between the plastic hangers and the plastic peg boards. All in I will be buying more when I get moved into our house and I'm very satisfied with the product in looks and functionality. Now if only they sold these in 15 to 20 panel kits too.

The ONLY reason for the 4 stars is because WallPeg machinists didn't do a nicely finished job with drilling the holes evenly and removing the plastic debris. See my pictures and video. Please do a cleaner job with the machining. I had to pluck out the dangling plastic inside the holes so they don't litter my floor when I put in the baskets and shelving. Nonetheless, let's end on the positives! I bought 4 of these WallPeg brand boards, and 2 smaller boards from a different brand. I've since thrown away both the other brand and purchased 3 more of these from WallPeg!! They are lightweight but VERY sturdy. The size is perfect for anything around your home. The black color is consistent, no patchiness. They are crazy easy to install, which is one of the reasons (among others) that I threw away the other brand I bought–what a freakin' hassle those things were. The screws these WallPeg boards come with are high quality and sturdy, go in easily, but grip tightly and securely. The value for the money is terrific. You need these! Just be prepared to finesse a few of the holes. Very easy to do; no hard labor. Just a little bit time consuming when you've bought quite a few.

I included a pic of my install showing 2 sets (4 pegboards each) of these panels. Be advised that there are NO screws included, so you will need screws and/or anchors to attached these to the wall. However, the way they are built, they are already offset from the wall when you attach them. Unlike just a plain pegboard that will need offsets from the wall so that you can insert your hangers, these units do not any other parts except screws. They're also sturdy, and capable of hanging some heavier items. This I thought was great-, the screw holes are 8" apart, so every other screw will line up with your wall studs, meaning 4 screws on each panel can be screwed into a stud without modifying or drilling extra holes in your new pegboard. Enjoy!

Works great on 24" studs, level the first one, the rest just stack and screw. Exactly what I expected!!

Solid, just what I was looking for. Came with good screws, perfect spacing for 16” on center studs . Super solid once mounted. I like that when they sit together, it looks continuous, no funky gaps of the holes

You cannot use the peg holes by the edges; there is no hardware to install them (screws & anchors). Other than that, it's a good product

I bought these and I'm very happy I did. Now I can bug my husband to go organize his boxes of tools in the garage.

جميل جدا وسهل التركيب ويظيف منظر جميل للجدار

Love my peg boards! I use it to hang all my art supplies and such. They look good and easy to assemble to the wall.

It’s make my tools 🧰 more arranging

Muy útiles y de buen material y si tiene los tornillos

Good size board and appears sturdy. Good product.